WorkspaceManager_Dlg-ComponentVariationFormPhysical Component Properties_AD

The Physical Component Properties dialogThe Physical Component Properties dialog

Summary

This dialog allows the user to view the logical and physical designators for the selected component, and select the component naming scheme.

Access

To access the Physical Component Properties dialog, switch the schematic editor to the compiled tab view (available when design variations exist), and double-click on any component.

Options/Controls

Annotation

  • Logical Designator – this uneditable field displays the logical designator for the component.
  • Visible – this checkbox indicates the current display state of the component's Designator – whether it is visible in the workspace or not. The checkbox is uneditable.
You can change the visibility of designators from either the base design itself using the Editor tab, or directly within a compiled document view using the SCH Inspector panel or SCH List panel.
  • Annotate – enable this option to access the following controls to define the desired annotation. These controls are available only when Annotate is checked:
    • Lock Physical Designator – select to enter a custom physical designator in the text box. The text box is available only when Lock Physical Designator is selected.
    • Apply Naming Scheme – select to generate a designator using a current naming scheme (use to change the scheme).
    • Annotate Options – use to access the Board Level Annotation Options dialog, from where you can either choose a predefined naming scheme or specify your own custom scheme.
    • Prefix – this uneditable field is populated based on the logical designator information for the component. The field and information shown will depend on the chosen naming scheme.
    • Global Index – this uneditable field is populated based on the logical designator information for the component. The field and information shown will depend on the chosen naming scheme.
    • Physical Designator – this uneditable field presents the calculated physical designator based on the logical designator information and the specified naming scheme that will be assigned when you click OK.
If you find an issue, select the text/image and pressCtrl + Enterto send us your feedback.
참고

Altium 제품에 접근할 수 있는 레벨에 따라 사용할 수 있는 기능이 달라집니다. 다양한 레벨의 Altium Designer Software Subscription에 포함된 기능과 Altium 365 플랫폼에서 제공하는 애플리케이션을 통해 제공되는 기능을 비교해보세요.

소프트웨어에서 논의된 기능을 찾을 수 없는 경우, Altium 영업팀에 문의하여 자세한 정보를 확인해주세요.