Workflow_Dlg-CreateProjectCreate Project (Based on Chosen Process) _AD

Created: October 30, 2018 | Updated: September 12, 2022 | Applies to version: 22

This document is no longer available beyond version 22. Information can now be found here: Creating a New Process-based Workspace Project for version 25

참고

Altium 제품에 접근할 수 있는 레벨에 따라 사용할 수 있는 기능이 달라집니다. 다양한 레벨의 Altium Designer Software Subscription에 포함된 기능과 Altium 365 플랫폼에서 제공하는 애플리케이션을 통해 제공되는 기능을 비교해보세요.

소프트웨어에서 논의된 기능을 찾을 수 없는 경우, Altium 영업팀에 문의하여 자세한 정보를 확인해주세요.

The functionality described on this page is only available when using Altium Designer with active Altium Designer Enterprise Subscription and a connected Workspace.

The Create New Project dialog

Summary Copy Link Copied

This dialog, which actually is titled after the process name, is used to create a new Workspace project based on a chosen activated project creation process.

Access Copy Link Copied

The dialog is accessed by clicking File » New » Project in <Workspace> then selecting the desired command from the sub-menu.

This dialog is only accessible if you have utilized processes, which are created and managed through your connected Workspace's browser-based interface. Read more about Creating & Managing Processes (Altium 365 Workspace, Enterprise Server Workspace).

Options/Controls Copy Link Copied

General Tab

Project Name - enter a suitable name for the Workspace project.

The project name must start with and can contain lower or uppercase letters or 0-9. Underscores, dashes, and spaces are allowed but can only be used in the middle of the name (beginning and ending spaces will be ignored). You cannot use the following words: AUX, COM1-COM9, LPT1-LPT9, CON, NUL, or PRN. In addition, the name cannot contain the following characters: \ . / ? % * : | " < >.

Description - enter a meaningful description of the project.
PCB Project Type - use the drop-down to select a suitable project type.
Project Template - use the drop-down to select the desired template from a list of installed templates. Click to open a version of the Explorer panel (titled Select Project Template) to select the desired template.
Start - when clicked, the project will be created in accordance with the underlying workflow process.

Advanced Tab

Location - use to specify the location where the project will be located. Click to browse and select the desired location.
Create Project Folder - check to create a new project folder automatically.
Repository - use the drop-down to select the desired repository for the project.

Repository Folder - click to open the Add to Version Control dialog in which you can specify the repository folder.

The folder name must start with and can contain lower or uppercase letters or 0-9 and underscores. dashes, and spaces are allowed but can only be used in the middle of the name (beginning and ending spaces will be ignored). You cannot use the following words: AUX, COM1-COM9, LPT1-LPT9, CON, NUL, or PRN.

Server Folder - use to specify the server folder. Click to open the Choose Folder dialog in which you can choose the desired folder.

The server folder path can start with any symbol except space or slash and can contain any symbol except space at the end. Spaces are allowed in the middle of the server folder name.

If you find an issue, select the text/image and pressCtrl + Enterto send us your feedback.

프린터 출력용 버전

참고