Altium Designer 기술문서
...
((Dialog Reference))_AD
Dialogs((G to L))_AD
Sch_Dlg-SchJumpLocationJump To Location (SCH) _AD
Created: July 28, 2015 | Updated: June 19, 2017
| Applies to versions: 15.1, 16.0, 16.1, 17.0 and 17.1
Now reading version 17.0. For the latest, read: Sch_Dlg-SchJumpLocation((Jump To Location (SCH) ))_AD for version 22
Two incarnations of the Jump To Location dialog.
Summary
This dialog allows the designer to specify X and Y 'jump' coordinates. While the controls of the dialog remain the same, the actual use of the dialog, and its banner text, will vary depending on the context in which it was accessed - for example to paste an object at a particular location in the workspace, or to move an object, or selection, by a certain amount within the workspace.
Access
The dialog can be accessed and used in both the Schematic Editor and the Schematic Library Editor.
- Schematic Editor and Schematic Library Editor - the dialog can be accessed in the following ways:
- With one or more objects selected in the workspace, use the Edit » Move » Move Selection by X, Y command from the main menus. This will give access to the Move Selection by X, Y dialog.
- Press Tab while pasting a copied object (or selection of objects), to access the Paste To Position dialog.
- For a placed polygon object, access the Vertices tab of the Polygon dialog, and use the Move Polygon By XY command (available from the Menu button or right-click menu). This will give access to the Move Polygon By dialog.
- For a placed polyline object, access the Vertices tab of the PolyLine dialog, and use the Move Line By XY command (available from the Menu button or right-click menu). This will give access to the Move Line By dialog.
- Schematic Editor only - the dialog can be accessed in the following ways:
- For a placed wire object, access the Vertices tab of the Wire dialog, and use the Move Wire By XY command (available from the Menu button or right-click menu). This will give access to the Move Wire By dialog.
- For a placed bus object, access the Vertices tab of the Bus dialog, and use the Move Bus By XY command (available from the Menu button or right-click menu). This will give access to the Move Bus By dialog.
- For a placed signal harness object, access the Vertices tab of the Signal Harness dialog, and use the Move Signal Harness By XY command (available from the Menu button or right-click menu). This will give access to the Move Signal Harness By dialog.
Options/Controls
- X - use this field to enter the X coordinate of the position that you wish the cursor to jump to (when using the dialog to paste to a position), or the delta X increment value (when using the dialog to move an object or selection).
- Y - use this field to enter the Y coordinate of the position that you wish the cursor to jump to (when using the dialog to paste to a position), or the delta Y increment value (when using the dialog to move an object or selection).