PCB_Dlg-SetupAnnotatePositional Re-Annotate_AD

Now reading version 17.1. For the latest, read: PCB_Dlg-SetupAnnotate((Positional Re-Annotate))_AD for version 22

The Positional Re-Annotate dialog.
The Positional Re-Annotate dialog.

Summary

Use this dialog to configure the scope of annotation (components (further targeted by side, or selection), or free pads), the direction of annotation (based on object position), and additional options, such as a starting index, and whether locked designators should be protected. As you select a style of annotation, a graphical depiction is shown within the dialog as a visual indication of how annotation will transpire.

Access

To open the dialog, select Tools » Re-Annotate from the toolbar.

Options/Controls

  • Annotate Direction - Choose the order of re-annotation. The There are 5 options available:
    • 1 By Ascending X Then Ascending Y
    • 2 By Ascending X Then Descending Y 
    • 3 By Ascending Y Then Ascending X 
    • 4 By Descending Y Then Ascending X 
    • 5 Name from Position
  • Annotate Scope - Specify the scope of re-annotation. Select scope by Components (Top Side, Then Bottom Side, Top Side Only, Bottom Side Only, or Selected Components) or Pads (Free Pads).
  • Protect Locked Designators - Check the box to ignore components whose designators are locked during re-annotation.
  • Comparison Threshold - The position distance threshold to change re-annotation direction.
  • Start Index - Specify the start index for re-annotation.
If you find an issue, select the text/image and pressCtrl + Enterto send us your feedback.
참고

Altium 제품에 접근할 수 있는 레벨에 따라 사용할 수 있는 기능이 달라집니다. 다양한 레벨의 Altium Designer Software Subscription에 포함된 기능과 Altium 365 플랫폼에서 제공하는 애플리케이션을 통해 제공되는 기능을 비교해보세요.

소프트웨어에서 논의된 기능을 찾을 수 없는 경우, Altium 영업팀에 문의하여 자세한 정보를 확인해주세요.