CompMake_Dlg-PCMWizardDialogPCB Component Wizard_AD

Now reading version 17.1. For the latest, read: CompMake_Dlg-PCMWizardDialog((PCB Component Wizard))_AD for version 18.0

The PCB Component Wizard  is used to create a new component footprint within the current PCB Library Editor document. The Wizard will lead you through simple steps to define layout, pad spacing, and other component attributes.

For more information about creating a component Footprint, see the Creating the PCB Footprint page.

Using the PCB Component Wizard

The PCB Component Wizard  is launched by clicking Tools » Component Wizard from a PCB Library document (*.PcbLib).

Wizard Navigation

  • Click Cancel to close the PCB Component Wizard.
To manually create the component footprint without the aid of the Wizard, click Cancel after opening the Wizard and before proceeding beyond this step. A new component footprint will be created and an empty workspace will be opened in the main design window. A default name will be given to the new component in the Components region of the PCB Library panel (e.g., PCBCOMPONENT_1). Use the Component Properties command from the main menu (Tools » Component Properties) or right-click in the PCB Library panel to open the PCB Library Component dialog from where you can change the name as required.
  • Click Back to navigate to the previous screen.
  • Click Next to navigate to the next screen.
  • Click Finish to close the PCB Component Wizard. This option is available only on the final page of the Wizard.

Selecting Component Patterns

Use the Component patterns page to specify the pattern of the component you want to create. 

Select the desired pattern from the list then use the drop-down to select the unit for the component (Imperial (mil) or Metric (mm)).

The subsequent pages of the Wizard change depending upon the component pattern selected. Find the desired component pattern in the following list and click on the link to access the information regarding that component pattern.

Setting the Component Name

Enter a name for the component in the textbox. 

Completing and Closing the Wizard

Click Finish to close the Wizard.

If you find an issue, select the text/image and pressCtrl + Enterto send us your feedback.
참고

Altium 제품에 접근할 수 있는 레벨에 따라 사용할 수 있는 기능이 달라집니다. 다양한 레벨의 Altium Designer Software Subscription에 포함된 기능과 Altium 365 플랫폼에서 제공하는 애플리케이션을 통해 제공되는 기능을 비교해보세요.

소프트웨어에서 논의된 기능을 찾을 수 없는 경우, Altium 영업팀에 문의하여 자세한 정보를 확인해주세요.