PCB_Dlg-JumpLocationJump To Location (PCB) _AD

Now reading version 21.0. For the latest, read: PCB_Dlg-JumpLocation((Jump To Location (PCB) ))_AD for version 22

The Jump To Location dialogThe Jump To Location dialog

Summary

The Jump To Location dialog allows you to quickly jump to a location within the design workspace by specifying required coordinates.

The location will be relative to the workspace's absolute origin (bottom-left corner of the workspace) unless a user-defined (Current) origin has been set, in which case it will be relative to that point.

Access

The dialog is accessed from both the PCB editor and PCB Library editor by clicking Edit » Jump » New Location from the main menus.

Options/Controls

  • X-Location - use this field to specify the X coordinate for the required location to which you want to jump.
  • Y-Location - use this field to specify the Y coordinate for the required location to which you want to jump.
  • Delta X - use this field to specify the delta X coordinate for the required location to which you want to jump.
  • Delta Y - use this field to specify the delta Y coordinate for the required location to which you want to jump.

 

If you find an issue, select the text/image and pressCtrl + Enterto send us your feedback.
참고

Altium 제품에 접근할 수 있는 레벨에 따라 사용할 수 있는 기능이 달라집니다. 다양한 레벨의 Altium Designer Software Subscription에 포함된 기능과 Altium 365 플랫폼에서 제공하는 애플리케이션을 통해 제공되는 기능을 비교해보세요.

소프트웨어에서 논의된 기능을 찾을 수 없는 경우, Altium 영업팀에 문의하여 자세한 정보를 확인해주세요.