Altium Designer 기술문서
...
((Dialog Reference))_AD
Dialogs((A to F))_AD
PCB_Dlg-IncludeSnapPointFormChoose Selectable Points_AD
Created: January 13, 2023 | Updated: January 13, 2023
| Applies to version: 22
This document is no longer available beyond version 22.0. Information can now be found here: Orienting and Positioning the 3D Model Using the 3D Body Placement Commands for version 24
The Choose Selectable Points dialog
Summary
The Choose Selectable Points dialog is used to select how a point is chosen on a 3D model when running various 3D Body placement commands.
Access
This dialog is opened after running a command that requires a point on a 3D model to be selected. Run the command, click on a placed 3D model then press the Tab key. Any of the following commands can be used to access the dialog:
- Tools » 3D Body Placement » Orient And Position 3D Body.
- Tools » 3D Body Placement » Position 3D Body.
- Tools » 3D Body Placement » Set Body Height.
- Tools » 3D Body Placement » Measure Distances.
Options/Controls
Up to two point types can be included:
- Include Vertices - enable to be able to select and measure from any vertices on the 3D model.
- Include Snap Points - enable to be able to select and measure from any placed snap points on the 3D model.
