Defining CAM Editor Film Box Preferences for Altium Designer

The CAM Editor - Film Box page of the Preferences dialog.

Summary

The CAM Editor – Drawing Modes page of the Preferences dialog provides numerous controls relating to the general settings of the CAM Editor within the CAM design space.

Access

This page is part of the main Preferences dialog that is accessed by clicking the  control in the upper-right corner of the workspace then selecting the Film Box entry under the CAM Editor folder.

Options/Controls

Box Name

  • Box Name - use this drop-down to select one of the following values from the box name. This field must contain a valid name, for example: "box1".

Box Size (Inch)

  • X - enter the desired X-axis box size in inches.
  • Y - enter the desired Y-axis box size in inches.

Lower Left Corner (Inch)

  • X - enter the desired X-axis lower-left corner size in inches.
  • Y - enter the desired Y-axis lower-left corner size in inches.

Display

  • Display Box At Start Up - enable this option if you want the film box to appear when the CAM Editor starts up.
If you find an issue, select the text/image and pressCtrl + Enterto send us your feedback.
참고

Altium 제품에 접근할 수 있는 레벨에 따라 사용할 수 있는 기능이 달라집니다. 다양한 레벨의 Altium Designer Software Subscription에 포함된 기능과 Altium 365 플랫폼에서 제공하는 애플리케이션을 통해 제공되는 기능을 비교해보세요.

소프트웨어에서 논의된 기능을 찾을 수 없는 경우, Altium 영업팀에 문의하여 자세한 정보를 확인해주세요.