VersionControl_Cmd-ToggleExplorerViewToggleExplorerView_AD

Created: 10月 06, 2017 | Updated: 3月 06, 2024 | Applies to versions: 1.0, 1.1, 2.0, 2.1, 3.0, 3.1, 3.2, 4 and 5

現在、バージョン 1.1. をご覧頂いています。最新情報については、バージョン VersionControl_Cmd-ToggleExplorerView((ToggleExplorerView))_AD の 5 をご覧ください。

This documentation page references Altium NEXUS/NEXUS Client (part of the deployed NEXUS solution), which has been discontinued. All your PCB design, data management and collaboration needs can now be delivered by Altium Designer and a connected Altium 365 Workspace. Check out the FAQs page for more information.

Parent page: VersionControl Commands

The following pre-packaged resource, derived from this base command, is available:

Toggle Viewing Mode (Storage Manager Panel)

Applied Parameters: None

Summary

This command is used to switch between the two different viewing modes (Classic View and Combined View) for the Storage Manager panel.

Access

This command can be accessed from the Storage Manager panel in the following ways:

Combined View - right-click in the Time line region of the panel and choose the Switch to Classic View command from the context menu.
Classic View - right-click in the Local History or VCS Revisions region of the panel and choose the Switch to Combined View command from the context menu.

Use

After launching the command, the Storage Manager panel will be configured to present in its Classic View or Combined View, depending on the previous view in-force:

Classic View - where VCS and History events are shown in separate regions (VCS Revisions and Local History).
Combined View - where combined VCS/History events are shown in a single region (Time line).

印刷用ページ

If you find an issue, select the text/image and pressCtrl + Enterto send us your feedback.

VersionControl_Cmd-ToggleExplorerViewToggleExplorerView_AD

Summary

Access

Use

Was this page helpful?