Altium NEXUS Home
...
((Dialog Reference))_AD
Dialogs((A to F))_AD
PCB_Dlg-LayerFormEdit Layer_AD
Created: 7月 28, 2015 | Updated: 3月 06, 2024
| Applies to version: 1.0
現在、バージョン 1.0. をご覧頂いています。最新情報については、バージョン PCB_Dlg-LayerForm((Edit Layer))_AD の 5 をご覧ください。
The Edit Layer dialog
Summary
This dialog allows you to edit the layer name and copper thickness.
Access
In the PCB editor, double-click on a Layer tab at the bottom of the workspace.
Options/Controls
- Name - Create or edit the layer's name in this field.
- Copper thickness - Enter copper thickness for the layer in this field. Use the Ctrl+Q hotkey to switch between unit measurements (
mmormil).
When an internal plane is selected, the dialog will appear as below:
- Name - Create or edit the internal plane's name in this field.
- Copper thickness - Enter copper thickness for the internal plane in this field. Use the Ctrl+Q hotkey to switch between unit measurements (
mmormil). - Net name - Choose a net from drop-down list to assign to the internal plane.
- Pullback - Enter the pullback value for the internal plane.