PCB_Dlg-ComponentRuleCheckComponent Rule Check_AD

Created: 8月 04, 2017 | Updated: 2月 22, 2018 | Applies to versions: 1.0, 1.1, 2.0, 2.1, 3.0, 3.1, 3.2, 4 and 5

現在、バージョン 2.0. をご覧頂いています。最新情報については、バージョン PCB_Dlg-ComponentRuleCheck((Component Rule Check))_AD の 5 をご覧ください。

This documentation page references Altium NEXUS/NEXUS Client (part of the deployed NEXUS solution), which has been discontinued. All your PCB design, data management and collaboration needs can now be delivered by Altium Designer and a connected Altium 365 Workspace. Check out the FAQs page for more information.

The Component Rule Check dialog

Summary

The Component Rule Check dialog allows you to specify rules to check a component that is currently active in the PCB library.

Access

The dialog is accessed from the PCB Library Editor by clicking Reports » Component Rule Check from the main menus.

Options/Controls

Duplicate

Pads - enable this option to check for components with duplicate pads.
Primitives - enable this option to check for components with duplicate primitives.
Footprints - enable this option to check for components with duplicate footprints.

Constraints

Missing Pad Names - enable this option to check for components with missing pad names.
Mirrored Component - enable this option to check for components that are mirrored.
Offset Component Reference - enable this option to check for components with the component reference offset.
Shorted Copper - enable this option to check for components with shorted copper.
Unconnected Copper - enable this option to check for components with unconnected copper.
Check All Components - enable this option to check all components in the library.

After clicking OK, a Component Rule Check Report with the extension *.ERR will be generated that lists the violations based on the options you enabled.

印刷用ページ

If you find an issue, select the text/image and pressCtrl + Enterto send us your feedback.