Sch_Dlg-RoundingcoordinatesofobjectsRounding Coordinates of Objects_AD

現在、バージョン 21.0. をご覧頂いています。最新情報については、バージョン Sch_Dlg-Roundingcoordinatesofobjects((Rounding Coordinates of Objects))_AD の 22 をご覧ください。
 

The Rounding coordinates of objects dialog
The Rounding coordinates of objects dialog

Summary

The Rounding coordinates of objects dialog is used to define to which documents the rounding process will be applied. The rounding process rounds up the internal coordinates of objects to counter any rounding effect when switching from Imperial to Metric measurement units mid-design. The overall result is that the internal coordinates of all design objects will be as they would have been if you had started designing with metric units from the onset.

Access

The dialog is accessed from the schematic editor by clicking Tools » Convert » Round coordinates of objects from the main menus.

Options/Controls

Choose Document Scope

  • Just this document - round coordinates only for the current document.
  • All schematic documents in the current project - round coordinates for all schematic documents of the current project. Schematic documents of the current project that are currently closed will be opened.
  • All open schematic documents - round coordinates for all the schematic documents that are currently opened regardless of the project to which they belong.
After you make your selection and click OK, an information dialog will open that summarizes how many objects on how many documents had their coordinates rounded.
If you find an issue, select the text/image and pressCtrl + Enterto send us your feedback.
注記

利用できる機能は、Altium 製品のアクセスレベルによって異なります。Altium Designer ソフトウェア サブスクリプション の様々なレベルに含まれる機能と、Altium 365 プラットフォーム で提供されるアプリケーションを通じて提供される機能を比較してください。

ソフトウェアの機能が見つからない場合は、Altium の営業担当者に連絡して 詳細を確認してください。

Content