Sch_Dlg-ResetPartSheetSymbolUniqueIDsReset Part and Sheet Symbol Unique IDs_AD

Created: 7月 28, 2015 | Updated: 6月 19, 2017 | Applies to versions: 15.1, 16.0, 16.1, 17.0 and 17.1

現在、バージョン 16.0. をご覧頂いています。最新情報については、バージョン Sch_Dlg-ResetPartSheetSymbolUniqueIDs((Reset Part and Sheet Symbol Unique IDs))_AD の 20.2 をご覧ください。

注記

利用できる機能は、Altium 製品のアクセスレベルによって異なります。Altium Designer ソフトウェアサブスクリプションの様々なレベルに含まれる機能と、Altium 365 プラットフォームで提供されるアプリケーションを通じて提供される機能を比較してください。

ソフトウェアの機能が見つからない場合は、Altium の営業担当者に連絡して詳細を確認してください。

The Reset Part and Sheet Symbol Unique IDs dialog.
The Reset Part and Sheet Symbol Unique IDs dialog.

Summary Copy Link Copied

This dialog allows designers to reset the Unique IDs for Parts and Sheet Symbols.

The component UID is used to link each schematic component to its PCB component. If these are reset then you will need to re-establish the link, which can be done at any time by selecting the Project » Component Links command in the PCB editor. This PCB editor command updates each PCB UID to match the current schematic UID. Note that when the UIDs are not matching, the software relies on the designators instead, so these should be matching before resetting schematic component UIDs.

Access Copy Link Copied

In the Sch editor, select Tools » Convert » Reset Component Unique IDs from the toolbar.

Options/Controls Copy Link Copied

Reset Component UIDs

Reset Duplicates - Select this option to reset duplicate UIDs only.
Reset All Component Unique IDs - Select this option to reset all UIDs.

Choose Document Scope

Just this document - Select this option to reset Unique ID for the current document only.
All schematic documents in the current project - Select this option to reset Unique IDs for the current project only.
All open schematic documents - Select this option to reset Unique IDs for all open schematics.

If you find an issue, select the text/image and pressCtrl + Enterto send us your feedback.

印刷用ページ

注記