Altium Designer Home
...
((Dialog Reference))_AD
Dialogs((G to L))_AD
Sch_Dlg-JunctionManualConvertingFormJunctions Conversion_AD
Created: 1月 17, 2023 | Updated: 1月 17, 2023
| Applies to version: 22
This document is no longer available beyond version 22.0. Information can now be found here: Converting Cross Junctions for version 25
The Junctions Conversion dialog
Summary
The Junctions Conversion dialog includes controls to change how junctions appear in schematic documents.
Access
The dialog is accessed from the schematic editor by clicking Tools » Convert » Convert Cross Junctions from the main menus.
Options/Controls
Scope
- Sheet Scope - choose one of the following options to determine the scope of the update:
- Current Document - update the active schematic document only with changes to its current template.
- Project Documents - update the active schematic document as well as all other schematic documents in the active project with changes to their respective current templates. Schematics that are currently closed will be opened.
- Open Documents - update the active schematic document as well as all other open schematic documents (regardless of parent project) with changes to their respective current templates.
- Selection - use the drop-down to choose the desired objects of the scope:
- Selected Objects - select only the objects that are selected in the chosen sheet(s) from Sheet Scope.
- All Objects - select all objects in the selected sheet(s) from Sheet Scope.
Options
- Miter Size - enter a value to define the size of the miter.