PCB_Cmd-OffsetSelectionOffsetSelection_AD

Created: 9月 26, 2017 | Updated: 7月 12, 2018 | Applies to versions: 18.0, 18.1, 19.0, 19.1, 20.0, 20.1, 20.2 and 21

現在、バージョン 19. をご覧頂いています。最新情報については、バージョン PCB_Cmd-OffsetSelection((OffsetSelection))_AD の 22 をご覧ください。

Parent page: PCB Commands

The following pre-packaged resource, derived from this base command, is available:

Move Selection by X, Y

Applied Parameters: None

Summary

This command is used to offset the current selection of objects by a precise amount in X and/or Y directions.

Access

This command can be accessed from the PCB Editor and the PCB Library Editor by:

Choosing the Edit » Move » Move Selection by X, Y command from the main menus.

Use

First ensure that the objects to be moved using this feature are selected in the design workspace.

After launching the command, the Get X/Y Offsets dialog will open. Use this dialog to specify delta X and/or delta Y increment values by which to move the selection. After clicking OK, the selection will be moved accordingly.

Tips

If an object is locked and you try to move it, you will be prompted with a confirmation dialog alerting you to this and asking if you want to continue.

Move Selection by X, Y (from Active Bar)

Applied Parameters: None

Summary

This command is used to offset the current selection of objects by a precise amount in X and/or Y directions.

Access

This command can be accessed from the PCB Editor and the PCB Library Editor, by:

Locating and using the Move Selection by X, Y command () on the Active Bar.

Click and hold on the active button to access a menu of all associated commands for that grouping. If the command has been recently used from the Active Bar, it will become the active/visible button. When other commands are available it is indicated by a triangle at the bottom-right corner of the button.

Use

First ensure that the objects to be moved using this feature are selected in the design workspace.

Tips

If an object is locked and you try to move it, you will be prompted with a confirmation dialog alerting you to this and asking if you want to continue.

印刷用ページ

If you find an issue, select the text/image and pressCtrl + Enterto send us your feedback.

注記

利用できる機能は、Altium 製品のアクセスレベルによって異なります。Altium Designer ソフトウェアサブスクリプションの様々なレベルに含まれる機能と、Altium 365 プラットフォームで提供されるアプリケーションを通じて提供される機能を比較してください。

ソフトウェアの機能が見つからない場合は、Altium の営業担当者に連絡して詳細を確認してください。

PCB_Cmd-OffsetSelectionOffsetSelection_AD

Summary

Access

Use

Tips

Summary

Access

Use

Tips

Was this page helpful?