Working with a Transmission Line Table Object on a Draftsman Document in Altium Designer

Parent page: Draftsman Objects

A placed Transmission Line Table with a range of cell formatting.

Summary

A Draftsman Transmission Line Structure Table is a table object that is populated with layer structure and calculated impedance data drawn from the Layer Stack Manager. Transmission Line impedance calculations that apply to all active Impedance Profiles are included in the table. The table's visual style is configurable in the Properties panel.

► See example

Availability

A Transmission Line Table is available for placement in a Draftsman document in the following ways:

• Choose the Place » Transmission Line Table command from the main menu.
• Click the Transmission Line Table entry () in the table objects drop-down menu on the Active Bar located at the top of the workspace. Click and hold an Active Bar button to access other related commands. Once a command has been used, it will become the topmost item on that section of the Active Bar.
  
• Right-click in the drawing workspace then select Place » Transmission Line Table from the context menu.
• Click the Transmission Line Table () entry in the tables drop-down menu () on the Drawing Annotations toolbar (click View » Toolbars » Drawing Annotations to enable).

Placement

After launching the Transmission Line Table placement command a new table object, populated with Layer and Impedance data is drawn from the board Layer Stack, is attached to the cursor. Move the cursor to the desired position then click to confirm the placement.

Graphical Editing

The position of a placed Transmission Line Table may be graphically changed by selecting within the table object and then dragging it to a new location. Note that the table cannot be graphically resized, but will automatically scale to accommodate the font and column properties specified in the Properties panel.

Non-Graphical Editing

Properties page: Transmission Line Table Properties

The non-graphical method of editing a Transmission Line Table is available in the Draftsman Properties panel, which provides a range of editable properties and style settings for placed Draftsman objects.

The Properties panel when a Transmission Line Table is selected.

To open the Properties panel and access the properties of a placed Transmission Line Table:

• Double-click on the Transmission Line Table object in the workspace.
• Right-click on the Transmission Line Table then select Item Properties from the context menu.

If the Properties panel is already active:

• Click on the Transmission Line Table object to access its properties in the panel.

To manually open the Properties panel, select View » Panels » Properties from the main menu or click the button at the bottom right of the workspace then select Properties from the pop-up menu.