Search In: Doc:Documentation: Altium CircuitStudio
Altium DesignerAltium 365Altium MCAD CoDesignerAltium On-Prem Enterprise ServerAltium CircuitMakerCompany DashboardAltium Infrastructure Server
Close
Search Search on Documentation
Documentation Altium CircuitStudio ... PCB Dialogs

Interactive Routing

Created: December 16, 2024 | Updated: August 13, 2018
Other Related Resources
Interactive Routing
PCB Editor - Interactive Routing (Preferences)
Edit Net (Dialog)
Favorite Interactive Routing Widths (Dialog)
Favorite Interactive Via Sizes (Dialog)
PCB Design Rules Reference

Parent page: PCB Dialogs

 

The Interactive Routing dialog

Summary

This dialog provides controls to change interactive routing settings on-the-fly for the net being routed. The dialog facilitates entry of an exact track width or via size, giving the ultimate level of control right at your fingertips. You can also check the current Interactive Routing settings, rather than having to drop out of routing and open the Preferences dialog.

Access

The dialog is accessed from the PCB Editor by pressing the Tab key while interactively routing a net using the Interactive Router.

Options/Controls

The dialog is essentially divided into two halves. The left-hand side provides controls relating to the interactive routing of the specific net in question, while the right-hand side provides the system-level interactive routing options that are available on the PCB Editor - Interactive Routing page of the Preferences dialog.

Left-Hand Side (Net-Specific)

Properties

  • User preferred Width - the current track width used when routing the net on the current routing Layer. This field can be populated in the following ways:
    • If the Track Width Mode (in the Interactive Routing Width / Via Size Sources region) is set to Rule Minimum, the field will take the minimum width defined for the corresponding layer (in the highest priority applicable routing Width rule).
    • If the Track Width Mode (in the Interactive Routing Width / Via Size Sources region) is set to Rule Preferred, the field will take the preferred width defined for the corresponding layer (in the highest priority applicable routing Width rule).
    • If the Track Width Mode (in the Interactive Routing Width / Via Size Sources region) is set to Rule Maximum, the field will take the maximum width defined for the corresponding layer (in the highest priority applicable routing Width rule).
    • If the Track Width Mode (in the Interactive Routing Width / Via Size Sources region) is set to User Choice, the field will take the favorite routing width chosen (Shift+W while interactively routing).
    • Choose a predefined favorite routing width from the field's drop-down list. This list reflects all predefined widths as configured in the Favorite Interactive Routing Widths dialog.
    • Enter a specific value into the field directly on-the-fly.
If the Characteristic Impedance Driven Width option is enabled for the applicable rule, the field will reflect the impedance value instead of width. A textual field below the Apply to all layers option reflects the Width/Impedance accordingly.
  • Apply to all layers - this option is used to determine the scope of the defined width, either to the specified layer only or to all routing layers. If the User Choice option is chosen (in the Interactive Routing Width / Via Size Sources region), and you chose to apply a predefined favorite routing width to all layers, this option will be enabled.
  • Via Hole Size - the current via hole size used when dropping a via while routing this net. This field can be populated in the following ways:
    • If the Via Size Mode (in the Interactive Routing Width / Via Size Sources region) is set to Rule Minimum, the field will take the minimum value defined for the via hole size (in the highest priority applicable Routing Via Style rule).
    • If the Via Size Mode (in the Interactive Routing Width / Via Size Sources region) is set to Rule Preferred, the field will take the preferred value defined for the via hole size (in the highest priority applicable Routing Via Style rule).
    • If the Via Size Mode (in the Interactive Routing Width / Via Size Sources region) is set to Rule Maximum, the field will take the maximum value defined for the via hole size (in the highest priority applicable Routing Via Style rule).
    • If the Via Size Mode (in the Interactive Routing Width / Via Size Sources region) is set to User Choice, the field will take the hole size portion of the favorite via size chosen (Shift+V while interactively routing).
    • Enter a specific value into the field directly, on-the-fly.
  • Via Diameter - the current via diameter used when dropping a via while routing this net. This field can be populated in the following ways:
    • If the Via Size Mode (in the Interactive Routing Width / Via Size Sources region) is set to Rule Minimum, the field will take the minimum value defined for the via diameter (in the highest priority applicable Routing Via Style rule).
    • If the Via Size Mode (in the Interactive Routing Width / Via Size Sources region) is set to Rule Preferred, the field will take the preferred value defined for the via diameter (in the highest priority applicable Routing Via Style rule).
    • If the Via Size Mode (in the Interactive Routing Width / Via Size Sources region) is set to Rule Maximum, the field will take the maximum value defined for the via diameter (in the highest priority applicable Routing Via Style rule).
    • If the Via Size Mode (in the Interactive Routing Width / Via Size Sources region) is set to User Choice, the field will take the diameter portion of the favorite via size chosen (Shift+V while interactively routing).
    • Enter a specific value into the field directly on-the-fly.
  • Layer - the current routing layer. Use the field's drop-down to switch to routing on a different layer (a via will be dropped to the target layer, with sizing as per the Via Hole Size and Via Diameter fields).
Selecting a predefined favorite track width and/or via sizing or specifying a value on-the-fly is referred to as User Choice. It allows you to be more agile with your routing while remaining within the boundaries of the applicable routing rules.
Whatever values are loaded/set in the dialog, you still have the full protection of the rules system. If a chosen/specified routing width and/or routing via size is outside the applicable min-max rule setting, the width and/or hole size and/or diameter will be clipped back to the minimum or maximum, whichever is appropriate.

Routing Width Constraints

This region displays information about the design rule that is being applied to the net's routing track width in terms of:

  • The name of the rule.
  • The minimum and maximum permissible track widths for the current routing layer. Values are presented in workspace units as well as calculated impedance values.
If a User Choice value has been entered for the User preferred Width - either from a chosen predefined favorite or an on-the-fly direct entry - the region will flag (with red text) if the value is outside of the applicable rule's boundaries (Max/Min limits). The value will be clipped to bring it back within range.
  • Edit Width Rule - click this button to access the Edit PCB Rule dialog with the applicable Width rule loaded. From here, you can modify the scope and/or constraints of the rule as required.

Via Style Constraints

This region of the dialog displays information about the design rule that is being applied to the net's routing via style in terms of:

  • The name of the rule.
  • The minimum and maximum permissible hole sizes for the via.
  • The minimum and maximum permissible diameters for the via.
If a User Choice value has been entered for the Via Hole Size/Via Diameter - either from a chosen predefined favorite, or an on-the-fly direct entry - the region will flag (with red text) if the value is outside of the applicable rule's boundaries (Max/Min limits). The value will be clipped to bring it back within range.
  • Edit Via Rule - click this button to access the Edit PCB Rule dialog with the applicable Routing Via Style rule loaded. From here, you can modify the scope and/or constraints of the rule as required.

Pin Swapping

  • Enabled - enable this option to allow pin swapping for components whose pins (pads) are members of this net.
Pin swapping requires the project to be up-to-date with respect to its compilation. A warning will be flagged (in red text) if this is not the case and the Enabled option will be grayed-out. Use the Compile Project button that is provided in this case to recompile the project. Keep in mind that after compilation, the project will require saving. Again, this is flagged in red text. The Enabled control will remain grayed-out until this is done.
Since the act of saving the project requires dropping out of the Interactive Routing dialog, it is a good idea to compile and save prior to performing an interactive route if you want to toggle the Pin Swapping capability for the net on-the-fly.

Menu

Click this button to access the following commands:

  • Edit Width Rule - use this command to access the Edit PCB Rule dialog with the currently applicable Width rule loaded. From here, you can modify the scope and/or constraints of the rule as required.
  • Edit Via Rule - use this command to access the Edit PCB Rule dialog with the currently applicable Routing Via Style rule loaded. From here, you can modify the scope and/or constraints of the rule as required.
  • Add Width Rule - use this command to create a new Width rule. The Edit PCB Rule dialog will open from where you can define the rule as required.
  • Add Via Rule - use this command to create a new Routing Via Style rule. The Edit PCB Rule dialog will open from where you can define the rule as required.
  • Net Properties - use this command to access the Edit Net dialog, with which you can browse and modify the properties of the net.
Keep in mind that a newly-created rule is given highest priority and, therefore, will become the rule applicable to this net.

Right-Hand Side (System Preferences)

Routing Conflict Resolution

  • Ignore Obstacles - enable this option to have the Interactive Router allow the track to pass through obstacles while routing.
  • Push Obstacles - enable this option to have the Interactive Router move existing tracks out of the way while routing. This mode can also push vias to make way for the new routing. If this mode cannot push an obstacle without causing violation, an indicator appears to show the route is blocked.
  • Stop At First Obstacle - enable this option to have the Interactive Router stop routing when it encounters the first obstacle in its path.
  • Current Mode - this field displays the current Routing Conflict Resolution mode chosen when using the Interactive Router. Use the associated drop-down to change the mode as required.
You can switch routing modes on-the-fly using Shift+R during routing.

Interactive Routing Options

  • Restrict To 90/45 - enable this option to restrict the routing to 90 degrees and 45 degrees only.
  • Automatically Remove Loops - enable this option to automatically remove any redundant loops that are created during manual routing. This allows a connection to be re-routed without having to manually remove redundant tracks.
When loops are needed, such as with power nets, the Remove Loops option can be disabled at the local, net-level (through the associated Edit Net dialog). The Remove Loops local setting for the specified net overrides this global setting for the same net.

Interactive Routing Width / Via Size Sources

  • Pickup Track Width From Existing Routes - enable this option to use the existing track width when routing from a placed track. That is, even if the current routing width is different to the existing track, the existing track width will be adopted when you continue the route from it.
  • Track Width Mode - use this field to choose a track width mode for interactive routing. The available modes are:
    • User Choice - with this mode enabled, the width is determined from the width selected in the Choose Width dialog, which is accessed by pressing Shift+W while routing.
    • Rule Minimum - with this mode enabled, the minimum width defined for the corresponding layer (in the highest priority applicable routing Width rule) will be used.
    • Rule Preferred - with this mode enabled, the preferred width defined for the corresponding layer (in the highest priority applicable routing Width rule) will be used.
    • Rule Maximum - with this mode enabled, the maximum width defined for the corresponding layer (in the highest priority applicable routing Width rule) will be used.
  • Via Size Mode - use this field to choose a via size mode for interactive routing. The available modes are:
    • User Choice - with this mode enabled, the via size is determined from the size selected in the Choose Via Size dialog, which is accessed by pressing Shift+V while routing.
    • Rule Minimum - with this mode enabled, the minimum values defined for the via diameter and hole size (in the highest priority applicable Routing Via Style rule) will be used.
    • Rule Preferred - with this mode enabled, the preferred values defined for the via diameter and hole size (in the highest priority applicable Routing Via Style rule) will be used.
    • Rule Maximum - with this mode enabled, the maximum values defined for the via diameter and hole size (in the highest priority applicable Routing Via Style rule) will be used.

Favorites

  • Favorite Interactive Routing Widths - click this button to access the Favorite Interactive Routing Widths dialog, with which you can predefine your favorite track widths to use when interactively routing a board using the Interactive Router.
  • Favorite Interactive Routing Via Sizes - click this button to access the Favorite Interactive Via Sizes dialog, with which you predefine your favorite via sizes to use when interactively routing a board using the Interactive Router.

 

If you find an issue, select the text/image and pressCtrl + Enterto send us your feedback.
Content