Search In: Doc:Documentation: Altium CircuitStudio
Altium DesignerAltium 365Altium MCAD CoDesignerAltium On-Prem Enterprise ServerAltium CircuitMakerCompany DashboardAltium Infrastructure Server
Close
Search Search on Documentation
Documentation Altium CircuitStudio ... Sch Dialogs

Arc

Created: December 16, 2024 | Updated: August 16, 2018
Other Related Resources
Arc (Object)

Parent page: Sch Dialogs

The Arc dialog

Summary

This dialog provides controls to specify the properties of an Arc object. An arc is a non-electrical drawing primitive. It is essentially a curved line segment which can be used when, for example, creating graphical symbols, custom sheet borders and title blocks.

For information on how a placed arc object can be modified graphically directly in the workspace, see Graphical Editing.

Access

The Arc dialog can be accessed during placement by pressing the Tab key.

After placement, the dialog can be accessed in one of the following ways:

  • Double-click on the placed arc object.
  • Place the cursor over the arc object, right-click then choose Properties from the context menu.

Options/Controls

  • Color - click the color sample to change the color of the arc using the standard Choose Color dialog.
  • Radius - the radius of the arc measured from its center point to the center of the arc line.
  • Line Width - the width of the arc line. Available widths are: Smallest, Small, Medium, and Large.
  • Start Angle - the start angle of the arc in degrees from the horizontal.
  • End Angle - the end angle of the arc in degrees from the horizontal.
The arc is drawn in a counterclockwise direction from the Start Angle to the End Angle. Enter a value between -360 and 360 for each of these angles.
  • Location X/Y - the current X (horizontal) and Y (vertical) coordinates for the center point of the arc. Edit these values to change the position of the arc in the horizontal and/or vertical planes respectively.
  • Locked - enable this option to protect the arc from being edited graphically.
An object that has its Locked property enabled cannot be selected or graphically edited. Double-click on the locked object directly then disable the Locked property to graphically edit the object.

 

If you find an issue, select the text/image and pressCtrl + Enterto send us your feedback.
Content