Search In: Doc:Documentation: NEXUS Client
Altium DesignerAltium 365Altium MCAD CoDesignerAltium CircuitMakerCompany DashboardAltium On-Prem Enterprise ServerAltium Infrastructure Server
Ver: Version: 5
543.23.13.02.12.01.11.0
Close
Search Search on Documentation
Documentation Altium NEXUS Documentation ... Dialog Reference M to R

Parameter Editor Options

Created: September 27, 2017 | Updated: March 06, 2024 | Applies to versions: 1.0, 1.1, 2.0, 2.1, 3.0, 3.1, 3.2, 4 and 5

This documentation page references Altium NEXUS/NEXUS Client (part of the deployed NEXUS solution), which has been discontinued. All your PCB design, data management and collaboration needs can now be delivered by Altium Designer and a connected Altium 365 Workspace. Check out the FAQs page for more information.

The Parameter Editor Options dialog The Parameter Editor Options dialog

Summary

The Parameter Editor Options dialog allows you to define the type of information that will display in the Parameter Table Editor.

Access

The dialog is accessed from the schematic editor by clicking Tools » Parameter Manager from the main menus. 

Options/Controls

  • Include Parameters Owned By - use the checkboxes to display parameters owned by:
    • Parts 
    • Nets (Parameters Sets) 
    • Sheet Symbols 
    • Pins 
    • Models 
    • Ports 
    • Documents 
  • That Meet the Following Criteria - select a scope of criteria from the drop down for objects to be included:
    • All Objects
    • Objects with existing parameters
    • Objects with existing used parameters
  • ​Other Options
    • ​Exclude System Parameters - enable this option to exclude all system parameters. 
    • Selected Objects Only - enable this option to include only selected objects.
 
If you find an issue, select the text/image and pressCtrl + Enterto send us your feedback.