Search In: Doc:Documentation: NEXUS Client
Altium DesignerAltium 365Altium MCAD CoDesignerAltium On-Prem Enterprise ServerAltium CircuitMakerAltium CircuitStudioCompany DashboardAltium Infrastructure Server
Ver: Version: 5
543.23.13.02.12.01.11.0
Close
Search Search on Documentation
Documentation Altium NEXUS Documentation ... Dialog Reference M to R

Rotation Angle

Created: October 10, 2017 | Updated: March 06, 2024 | Applies to versions: 1.0, 1.1, 2.0 and 2.1

Nexus message

This documentation page references Altium NEXUS/NEXUS Client (part of the deployed NEXUS solution), which has been discontinued. All your PCB design, data management and collaboration needs can now be delivered by Altium Designer and a connected Altium 365 Workspace. Check out the FAQs page for more information.

The Rotation Angle dialogThe Rotation Angle dialog

Summary

The Rotation Angle dialog allows you to specify an angle of rotation to be applied to selected objects in the workspace.

Access

The dialog is accessed in both the PCB Editor and the PCB Library Editor by clicking Edit » Move » Rotate Selection from the main menus.

Options/Controls

Use the field to enter a value for rotation (resolution 0.001 Degrees). Enter a positive value for counterclockwise rotation, or a negative value for clockwise rotation.

Rotation is about a subsequently chosen reference point in the workspace after clicking OK in the dialog.

 

If you find an issue, select the text/image and pressCtrl + Enterto send us your feedback.