Search In: Doc:Documentation: NEXUS Client
Altium DesignerAltium 365Altium MCAD CoDesignerAltium CircuitMakerCompany DashboardAltium On-Prem Enterprise ServerAltium Infrastructure Server
Ver: Version: 4
543.23.13.02.12.01.11.0
Close
Search Search on Documentation
Documentation Altium NEXUS Documentation ... Dialog Reference A to F

Choose PCB 3D Movie

Created: November 04, 2021 | Updated: November 04, 2021 | Applies to versions: 4 and 5
Now reading version 4. For the latest, read: Choose PCB 3D Movie for version 5

This documentation page references Altium NEXUS/NEXUS Client (part of the deployed NEXUS solution), which has been discontinued. All your PCB design, data management and collaboration needs can now be delivered by Altium Designer and a connected Altium 365 Workspace. Check out the FAQs page for more information.


The Choose PCB 3D Movie Dialog.

Summary

Choose an existing PCB 3D movie from this dialog and add a key frame to the movie.

Access

In 3D view, right-click in the design space then select Add Key Frame to 3D Movie » More 3D Movies from the context menu to open the dialog.

Options/Controls

 Clicking on a movie entry will add a new key frame – based on the current view of the board in the workspace – to the end of the key frame sequence.

  • PCB 3D Movie Mask - Type in this field to search for the target 3D movie. * is used to match any character.
  • List_PCB 3D Movies - All existing 3D movies are listed in this region.

A key frame added from the PCB Editor is always added at the end of a key frame sequence. It cannot be inserted at a specific position within a key frame sequence. This can only be achieved from within the PCB 3D Movie Editor panel.

If you find an issue, select the text/image and pressCtrl + Enterto send us your feedback.