Altium Designer Documentation
...
Dialog Reference
M to R
Rounding Coordinates of Objects
Created: June 09, 2017 | Updated: June 19, 2017
| Applies to versions: 15.1, 16.0, 16.1, 17.0 and 17.1
Now reading version 15.1. For the latest, read: Rounding Coordinates of Objects for version 22
The Rounding coordinates of objects dialog
Summary
The Rounding coordinates of objects dialog is used to define which documents the rounding process will be applied to - either the current document only, all schematic documents in the current (active) project, or all open schematic documents regardless of the project to which they belong.
Access
The dialog is accessed from the schematic editor by clicking Tools » Convert » Round coordinates of objects from the main menus.
Options/Controls
Choose Document Scope
- Just this document - round coordinates only for the current document.
- All schematic documents in the current project - round coordinates for all schematic documents of the current project. Schematic documents of the current project that are currently closed will be opened.
- All open schematic documents - round coordinates for all the schematic documents that are currently opened regardless of the project to which they belong.