Library Component Rule Check
Created: November 30, 2021 | Updated: November 30, 2021
| Applies to version: 21
Now reading version 21.0. For the latest, read: Library Component Rule Check for version 22
The Library Component Rule Check dialog
Summary
The Library Component Rule Check dialog provides controls to run a component rule check in the schematic library editor that generates a text report for specified settings.
Access
From the schematic library editor, click Reports » Component Rule Check from the main menus.
Options/Controls
Duplicate
- Component Names – enable this option to check for duplicated component names.
- Pins – enable this option to check for duplicated pins.
Missing
- Description – enable this option to check for missing descriptions.
- Footprint – enable this option to check for missing footprint names.
- Default Designator – enable this option to check for missing default designators.
- Pin Name – enable this option to check for missing pin names.
- Pin Number – enable this option to check for missing pin numbers.
- Missing Pins In Sequence – enable this option to check for missing pins in a sequence.