PadYSize_MidLayer9
This document is no longer available beyond version 21.0. Information can now be found here: PadYSize_MidLayerN for version 24
Parent page: PCB Query Functions - Fields
Summary
Returns pad objects whose Y Size (Mid Layer 9) property complies with the Query.
Syntax
PadYSize_MidLayer9 : Number
Number
will follow the measurement units currently employed for the document – either Imperial (mil; 1mil = 0.001inch) or Metric (mm; 1mm = 0.001meter).
A specific option for the measurement unit can be specified – overriding the default units specified at the document level – through use of an additional measurement unit-based keyword:
AsMils(
PadYSize_MidLayer9
) : Number
– to specify a size in mil.AsMM(
PadYSize_MidLayer9
) : Number
– to specify a size in mm.
Example Usage
PadYSize_MidLayer9
= 100
Returns all pad objects whose Y Size (Mid Layer 9) property is equal to 100 current measurement units.
PadYSize_MidLayer9 >= 4.064
Returns all pad objects whose Y Size (Mid Layer 9) property is greater than, or equal to, 4.064 current measurement units.
AsMils(PadYSize_MidLayer9) > 80
Returns all pad objects whose Y Size (Mid Layer 9) property is greater than 80mil.
AsMM(PadYSize_MidLayer9) Between 1.524 And 3.81
Returns all pad objects whose Y Size (Mid Layer 9) property is greater than or equal to 1.524mm
and less than or equal to 3.81mm
.
PadYSize_MidLayer9 <> 50
Returns all pad objects whose Y Size (Mid Layer 9) property is not equal to 50 current measurement units.
Tips
- For simple pads (with Stack Mode set to Simple) the Y Size (Mid Layer 9) property will be the same as the Y Size (All Layers) property, since the specified size is used for all signal layers.
- For Top-Middle-Bottom pads (with Stack Mode set to Top-Middle-Bottom) the Y Size (Mid Layer 9) property will be the same as the Y Size (Mid Layer 1) property, since the size specified for Signal Layer 1 is applied to all internal ('middle') signal layers.
- The Y Size (Mid Layer 9) property is only defined for pad objects.