InsertBillOfMaterials

Applied Parameters: None

Summary

This command is used to place a Bill of Materials table object into the active Draftsman document (*.PCBDwf). Presenting tabular data that is directly derived from the project PCB files, a Bill of Materials table provides a simple, visual way to convey crucial information for the PCB assembly process.

Access

This command can be accessed from the PcbDrawing Editor by:

• Choosing the Place » Bill Of Materials command from the main menus.
• Clicking the  button on the Drawing Annotations toolbar.
• Right-clicking in the workspace and choosing the Place » Bill Of Materials command from the context menu.

Use

If your PCB design project has more than one PCB, ensure that the board from which you wish to generate the BOM table is selected in the PCB Document field, on the General tab of the Draftsman Document Properties dialog.

After launching the command, data will be acquired from the source PCB document, and a Bill of Materials table will appear floating on the cursor. Position the table as desired and click to effect placement. If your Draftsman document has multiple sheets, you can simply zoom out and move the table to the intended sheet, while it is still floating on the cursor.

Tips

1. A Bill of Materials table can be graphically modified after placement. Click and drag the table to move it to a different location within the current sheet.
2. Most aspects of a placed Bill of Materials table are available for editing through the Properties panel. If the panel is already open, simply select a placed Bill of Materials table to populate the panel with its associated properties. If the panel is not open, double-click on the Bill of Materials table to access it.
3. The Data Filtering options in the Properties panel allow the BOM content to reflect a selected board design variant and/or filter the content to that of any Board Assembly View that has been placed within the Draftsman document (the default is All content and All Variants).
4. Setup the BOM table's available content and data grouping in the Bill Of Materials Configurations dialog. Access to this dialog is made by clicking the BOM Info button, at the bottom of the Properties panel, when browsing/modifying the properties of the selected Bill of Materials table. Of particular note is the Data Source property. This defines which PCB project data files are used to derive the BOM item list - by default, this the current Board design. The alternative Project option will extract BOM data from all design files in the nominated PCB project. The latter brings in all project data, including custom component parameters from the project schematic document(s).
5. If changes have been made to the PCB document, using the Tools » Update Board command will ensure that a placed Bill of Materials table is kept in-sync.
6. Defaults for this primitive type can be defined on the Draftsman - Primitive Defaults page of the Preferences dialog.