Draftsman - Primitive Defaults

• Assembly View – shows the board outline with cutouts, holes, and component graphics with additional notation. The component graphics are automatically generated and take data on a priority basis from the following sources:
  • The projection of a board component's three-dimensional model (3D model) – used by default.
  • A component's silk screen graphic taken from Top/Bottom Overlay layer – used when a 3D model is not available.
  • A graphic of the component's dimensions derived from its contact pads (its Bounding Box) – used when both a 3D models and screen overlay are not available.

​​
The Assembly View page

• Position – sets the object's rotational orientation to choices of 90º increments.
  • Rotation – use the drop-down to select the rotation: 0º, 90º, 180º, or 270º.
• Title – sets a view's title name, its font/color and visibility settings. System or custom Parameters can be used in the title.
  • Show Title – enable to show the title.
    • Title – enter the title name.
  • Use Document Font – enable to force the placed view to adopt the font style defined in the global Draftsman Document Options dialog.
    • Title Font – use to open the Font dialog to select the desired font. This option is available only when Use Document Font is not checked.
  • Title Color – use the drop-down to select the color for the title.
• Styles – sets the color and line weight/style for the board and component outlines.
  • Component Line Style – use to open the Line Style dialog to choose the line style for components.
  • Board Line Style – use to open the Line Style dialog to choose the line style for the board.
• Font – the font settings for component designators, which also defines the minimum and maximum size for the automatic scaling to fit into component graphics.

• Use Document Font – enable to force the placed view to adopt the font style defined in the global Draftsman Document Options dialog.
  • Font – use to open the Font dialog to select the desired font.
  • Minimum size, pt – enter the minimum point size of the font.
  • Maximum size, pt – enter the maximum point size of the font.

• View – use the following options to configure the view settings:
  • View – use the drop-down to select the direction of view: Top, Bottom, Left, Right, Front, or Back.
  • Display holes – use the drop-down to select how to display holes:
    • None – show no holes.
    • All – show all holes.
    • Pads only – show only construction holes.
    • Minimum diameter only – show only large holes.
  • Minimum Diameter – if Minimum diameter only was selected for Display holes, enter the size threshold setting.
  • Component Caption – select the parameter source for the text captions associated with components (Designator or BOM Item reference) from the drop-down.
  • Show SMD Pads – check to display surface mount component pads in the drawing. Use the associated drop-down menu to select the rendering color.
  • Show Through-Hole Pads – check to display any Through-Hole type pads that exist in the drawing. Use the associated drop-down menu to select the rendering color.
  • Show Silkscreen – check to show the board design's Silk Screen overlay on the drawing view, where the correct overlay (Top or Bottom) will be shown for the currently selected View setting.
• Component Display Settings – use the following options to configure how components are displayed.

• ​Geometry Source – use the drop-down to select the data source used for rendering the component's graphics. Choices include:
  • Assembly drawing – the component graphic data contained on a Mechanical Layer, as nominated in the Draftsman Document Options dialog.
  • Bounding box – dimensions derived from the component's contact pads.
  • Silk screen – the silk screen printing layer.
  • 3D Body projection – the component's 3D model, if available.
  • Default – the component graphics will be taken, in order of priority, from three of the options below (3D Body projection, Silk screen or Bounding box).

• Color – use the drop-down to select the color of component graphics.
• Reference Marker Display – enable/disable a component's visual reference marker (typically a dot indicating Pin 1 on a component). Use the drop-down to select either Off or Inside contour.
• Show Designator – toggle the visibility of a component's designator notation.
• Designator Location – if Show Designator is enabled, use the drop-down to select the the position settings for a component designator:
  • Center/Fit (default) – the designator is placed in the center of the component graphic and automatically scaled to fit.
  • Center, Top Left, Left, Bottom Left, Bottom, etc., – the designator is placed close to the component outline, in the position described.
  • Assembly Drawing – the designator, its position, and size is defined by the properties of the component designator (generally derived from a Designator special string on a specified Mechanical Layer – see Draftsman Document Options dialog for the Top/Bottom Assembly Layer settings.
• Hatching Pattern – the visual pattern and color used to render the component's profile, such as when it is displayed in a board Section View. Use to open the Fill Style dialog and choose the pattern.

• Fabrication View

​
The Fabrication View page

• Position – sets the object's rotational orientation to choices of 90º increments.
  • Rotation – use the drop-down to select the rotation: 0º, 90º, 180º, or 270º.
• Title – sets a view's title name, its font/color and visibility settings. System or custom Parameters can be used in the title.
  • Show Title – enable to show the title.
    • Title – enter the title name.
  • Use Document Font – enable to force the placed view to adopt the font style defined in the global Draftsman Document Options dialog.
    • Title Font – use to open the Font dialog to select the desired font. This option is available only when Use Document Font is not checked.
  • Title Color – use the drop-down to select the color for the title.
• View – use the following options to configure the view settings:
  • View Side – use the drop-down to select the view, either Top or Bottom.
  • Drawing Mode – how board conductors are displayed. Use the drop-down to select the drawing mode, either Full (solid and fully rendered) or Simplified (as lines).
  • Polygon Fill Mode – how polygons are displayed. Use the drop-down to select: Filled (solid) , Hatched (hatching fill) or Outline.
  • Board Line Style – the type, color and weight options for the line that defines the board perimeter. Use to open the Line Style dialog to select the line style.
  • Show Out of Board Copper – check to allow the Fabrication View to render any copper areas (tracks, fills, ploygons etc) that lie beyond the board outline perimeter.

• Drill Drawing View​ – offers the standard drawing view settings, such as position, title, and view.

The Drill Drawing View page​

• Title – sets a view's title name, its font/color and visibility settings. System or custom Parameters can be used in the title.
  • Show Title – enable to show the title.
    • Title – enter the title name.
  • Use Document Font – enable to force the placed view to adopt the font style defined in the global Draftsman Document Options dialog.
    • Title Font – use to open the Font dialog to select the desired font. This option is available only when Use Document Font is not checked.
  • Title Color – use the drop-down to select the color for the title.
• View – use the following options to configure the view settings:
  • View – use the drop-down to select the view, either Top or Bottom.
  • Rotation – use the drop-down to select the rotation: 0º, 90º, 180º, or 270º.
  • Board Line Style – the type, color and weight options for the line that defines the board perimeter. Use to open the Line Style dialog to select the line style.

• Detail View​ – allows a defined area of a drawing to be brought out to a floating, magnified view of its detail.

The Detail View page​​

• Position – sets the object's rotational orientation to choices of 90º increments.
  • Rotation – use the drop-down to select the rotation: 0º, 90º, 180º, or 270º.
• Title – sets a view's title name, its font/color and visibility settings. System or custom Parameters can be used in the title.
  • Show Title – enable to show the title.
    • Title – enter the title name.
  • Use Document Font – enable to force the placed view to adopt the font style defined in the global Draftsman Document Options dialog.
    • Title Font – use to open the Font dialog to select the desired font. This option is available only when Use Document Font is not checked.
  • Title Color – use the drop-down to select the color for the title.
• View – use the following options to configure the view settings:
  • ​Label – enter the desired label for the view.
  • Display Mode – use the drop-down to select the display mode: Connected, With Leader, or No Leader.
• ​Styles – sets the color and line weight/style for the board.
  • ​Connection Line Style – use to open the Line Style dialog to select the line style for connections.
  • Source Border Line Style – use to open the Line Style dialog to select the line style for the source border.
  • Detail Border Line Style -​ use to open the Line Style dialog to select the line style for the detail border.

• Section View​ – provides a profile slice, or sectional, drawing taken from a nominated 'cut' point through a placed PCB Assembly View. The Section View generator takes the available 3D data from the current PCB to create a standalone section drawing that is aligned to the nominated cut point.

​
The Section View page​

• Position – sets the object's rotational orientation to choices of 90º increments.
  • Rotation – use the drop-down to select the rotation: 0º, 90º, 180º, or 270º.
• Title – sets a view's title name, its font/color and visibility settings. System or custom Parameters can be used in the title.
  • Show Title – enable to show the title.
    • Title – enter the title name.
  • Use Document Font – enable to force the placed view to adopt the font style defined in the global Draftsman Document Options dialog.
    • Title Font – use to open the Font dialog to select the desired font. This option is available only when Use Document Font is not checked.
  • Title Color – use the drop-down to select the color for the title.
• View – use the following options to configure the view settings:
  • ​Positioning Mode – changes the cut orientation. Use the drop-down to select the positioning mode, either Horizontal or Vertical.
  • Flip View Direction – changes the directional view of the selected section cut (the direction from which you are 'looking'). The cut line direction arrows will change accordingly.
  • Slice Section – enables/disables the visibility of the objects behind the cut line – it removes the 'background' objects from the section view.
  • Label – enter the desired label for the view.
  • Board Cut Fill Style – sets the properties of the graphical pattern superimposed on cut objects, and therefore the appearance of the sliced object faces. Use to open the Fill Style dialog to select the style.
  • Display Mode – sets the cut line end arrow style. Use the drop-down to select the display mode, either Standard or Alternative.
  • Show Connector Line – toggles the line drawn between the cut arrows.
• ​Styles – use to determine the visual style of the cut line placed on the Assembly View.
  • Cutting Line Style -​ use to define the line's weight, style and color. Use to open the Line Style dialog to select the style.
  • Connector Line Style – sets the properties of the line drawn between the cut arrows. Use to open the Line Style dialog to select the line style for connectors.
  • Arrow Style – use to set the shape and weight of the cut arrow heads. Use to open the Arrow Style dialog to select the line style for arrows.

• Angular

The Angular page​

• ​Units
  • Show Unit Names – enable to show unit names.​
• ​Tolerance

  • ​Tolerance Type – use the drop-down to select the tolerance type: None, Symmetric, Bilateral, Limit.
  • Positive Tolerance – enter the desired positive tolerance. This is not available if None is selected for the Tolerance Type.
  • Negative Tolerance – enter the desired negative tolerance. This is not available if None or Symmetric is selected for the Tolerance Type.
• ​View
  • ​Elbow Position – use the drop-down to select the position of elbows: Automatic, Left, or Right.
  • Arrow Position – use the drop-down to select the position of arrow: Automatic, Outside, or Inside.
• ​Precision
  • ​Value Precision – the measured dimension in the base document units. Use the drop-down to select the precision value from the list.
  • Tolerance Precision – use the drop-down to select the tolerance precision value from the list.
• ​Appearance – use the following options to change the line width size, style and color, and arrow graphic style.
  • ​Dimension Line Style – use to open the Line Style dialog to select the dimension line style.
  • Extension Line Style – use to open the Line Style dialog to select the extension line style.
  • Extension Lines Gap – enter the value desired for extension lines gaps.
  • Extension Lines Offset – enter the value for extension lines offsets.
  • Arrow Style – use to open the Arrow Style dialog to select the style for arrows.
• Text
  • Use Document Font – enable to force the placed view to adopt the font style defined in the global Draftsman Document Options dialog.
  • Text Font – use to open the Font dialog to select the desired font. This option is available only when Use Document Font is not checked.
  • Text Color – use the drop-down to select the color for text.
  • Prefix – use to add prefix text to the dimension text. Enter the desired prefix, if necessary.
  • Suffix – use to add suffix text to the dimension text. Enter the desired suffix, if necessary.

• Linear

The Linear page​​

• Units
  The units system (Millimeters/Mils/Inches) that applies to a Draftsman document is defined by the Measurement Unit setting in the Draftsman Document Options dialog (Tools » Document Options). However, for individual objects such as Linear/Radial Dimensions, Drill/BOM Tables and the Layer Stack Legend, their default units may be preset here. These settings will override the document's base Units setting when a new object of that type is placed. In turn, the Units used by the placed object can be locally changed through the Units option in the Draftsman Properties panel.
  • ​Show Units – enable to show unit names, for example, 10.1mm rather than just 10.1.​
  • Dual Units – check to enable two measurements for each dimension, with one set to show the Primary Units type setting and the other showing the Dual Units type setting (Millimeters/Mils/Inches).
• ​Tolerance
  • ​Tolerance Type – use the drop-down to select the tolerance type: None, Symmetric, Bilateral, or Limit.
  • Positive Tolerance – enter the desired positive tolerance. This is not available if None is selected for the Tolerance Type.
  • Negative Tolerance – enter the desired negative tolerance. This is not available if None or Symmetric is selected for the Tolerance Type.
• ​View
  • ​Text Position – use the drop-down to select the position of elbows: Outside, Inside, Inside Aligned, or Outside Aligned.
  • Arrow Position – use the drop-down to select the position of arrow: Outside or Inside.
  • Show Additional Text – enable to show any additional text. Enter the text in the textbox.
• ​Precision
  • Value Precision – the measured dimension in the base document units. Use the drop-down to select the precision value from the list.
  • Dual Value Precision – the measured dimension in the base document units set for the alternative value. Use the drop-down to select the precision value from the list.
  • Tolerance Precision – use the drop-down to select the tolerance precision value from the list.
  • Dual Tolerance Precision – use the drop-down to select the tolerance precision value from the list, for the alternative unit measurement.
• ​Appearance​ – use the following options to change the line width size, style and color, and arrow graphic style.
  • ​Dimension Line Style – use to open the Line Style dialog to select the dimension line style.
  • Extension Line Style – use to open the Line Style dialog to select the extension line style.
  • Extension Lines Gap – enter the value desired for extension lines gaps.
  • Extension Lines Offset – enter the value for extension lines offsets.
  • Arrow Style – use to open the Arrow Style dialog to select the style for arrows.
• ​Text
  • Use Document Font – enable to force the placed view to adopt the font style defined in the global Draftsman Document Options dialog.
  • Text Font – use to open the Font dialog to select the desired font. This option is available only when Use Document Font is not checked.
  • Text Color – use the drop-down to select the color for text.
  • Prefix – use to add prefix text to the dimension text. Enter the desired prefix, if necessary.
  • Suffix – use to add suffix text to the dimension text. Enter the desired suffix, if necessary.

• Radial​

​
The Radial page​

• Units
  The units system (Millimeters/Mils/Inches) that applies to a Draftsman document is defined by the Measurement Unit setting in the Draftsman Document Options dialog (Tools » Document Options). However, for individual objects such as Linear/Radial Dimensions, Drill/BOM Tables and the Layer Stack Legend, their default units may be preset here. These settings will override the document's base Units setting when a new object of that type is placed. In turn, the Units used by the placed object can be locally changed through the Units option in the Draftsman Properties panel.
  • Show Units – enable to show unit names, for example, 10.1mm rather than just 10.1.​
  • Dual Units – check to enable two measurements for each dimension, with one set to show the Primary Units type setting and the other showing the Dual Units type setting (Millimeters/Mils/Inches).
• ​Tolerance
  • ​Tolerance Type – use the drop-down to select the tolerance type: None, Symmetric, Bilateral, or Limit.
  • Positive Tolerance – enter the desired positive tolerance. This is not available if None is selected for the Tolerance Type.
  • Negative Tolerance – enter the desired negative tolerance. This is not available if None or Symmetric is selected for the Tolerance Type.
• ​View
  • ​Text Position – use the drop-down to select the position of elbows: Aligned With Leader, Next to Leader, On Top of Elbow, or Next to Elbow.
  • Arrow Position – use the drop-down to select the position of arrow: Outside or Inside.
  • Show Additional Text – enable to show any additional text. Enter the text in the textbox.
• ​Precision ​
  • ​Value Precision – the measured dimension in the base document units. Use the drop-down to select the precision value from the list.
  • Dual Value Precision – the measured dimension in the base document units set for the alternative value. Use the drop-down to select the precision value from the list.
  • Tolerance Precision – use the drop-down to select the tolerance precision value from the list.
  • Dual Tolerance Precision – use the drop-down to select the tolerance precision value from the list, for the alternative unit measurement.
• ​Appearance​ – use the following options to change the line width size, style, color, and arrow graphic style.
  • ​Dimension Line Style – use to open the Line Style dialog to select the dimension line style.
  • Extension Line Style – use to open the Line Style dialog to select the extension line style.
  • Extension Lines Gap – enter the value desired for extension lines gaps.
  • Extension Lines Offset – enter the value for extension lines offsets.
  • Arrow Style – use to open the Arrow Style dialog to select the style for arrows.
• ​Text
  • Use Document Font – enable to force the placed view to adopt the font style defined in the global Draftsman Document Options dialog.
  • Text Font – use to open the Font dialog to select the desired font. This option is available only when Use Document Font is not checked.
  • Text Color – use the drop-down to select the color for text.
  • Prefix – use to add prefix text to the dimension text. Enter the desired prefix, if necessary.
  • Suffix – use to add suffix text to the dimension text. Enter the desired suffix, if necessary.

• Circle

​
The Circle page​

• ​Geometry
  • ​Center Point X – enter the center point for the X axis.
  • Center Point Y – enter the center point for the Y axis.
  • Radius – enter the radius.
• ​Styles – sets the line weight/style.
  • ​Line Style -​​ use to open the Line Style dialog to select the line style.

• Graphic

​
The Graphic page​

• ​Geometry​
  • Start Point X – enter the X axis starting point for the graphic image.
  • Start Point Y – enter the Y axis starting point for the graphic image.
  • Width – enter the image width.
  • Height – enter the image height.
  • Rotation – use the drop-down to select the image graphic rotation: 0º, 90º, 180º, or 270º.
• ​Image
  • ​Maintain Aspect Ratio – enable to maintain the image width/height ratio.

• Line

The Line page​​

• ​Geometry​
  • Start Point X – enter the line start point for the X axis.
  • Start Point Y – enter the line start point for the Y axis.
  • End Point X – enter the line end point for the X axis.
  • End Point Y – enter the line end point for the Y axis.
• ​Line Style
  • ​Style – use to open the Line Style dialog to select the line style.

• Rectangle

The Rectangle page​​

• ​Geometry​
  • Start Point X – enter the rectangle start point for the X axis.
  • Start Point Y – enter the reactange start point for the Y axis.
  • Width – enter the rectangle width.
  • Height – enter the rectangle height.
• Style​ – sets the line weight/style.
  • ​​Style – use to open the Line Style dialog to select the style.

• Text​

The Text page​​

• ​Geometry​
  • Start Point X – enter the text box start point for the X axis.
  • Start Point Y – enter the text box start point for the Y axis.
  • Width – enter the text box width.
  • Height – enter the box height.
  • Rotation – use the drop-down to select the text rotation: 0º, 90º, 180º, or 270º.
• Text
  • Use Document Font – enable to force the placed view to adopt the font style defined in the global Draftsman Document Options dialog.
  • Font – use to open the Font dialog to select the desired font. This option is available only when Use Document Font is not checked.
  • Color – use the drop-down to select the color for text.
  • Text – enter the default new text in the text box. Use to open the Document Parameters dialog in which you can manage the available parameters, and by inference, the availability of Special Strings.
  • Clip Text To Bounds – enable to constrain the text within the text box bounds (enable word wrap).
• Align
  • Horizontal – use the drop-down to align the text horizontally: Left, Center, or Right.
  • Vertical -​ use the drop-down to align the text vertically: Top, Center, or Bottom.

• Drill Table

The Drill Table page​

• Title – sets a view's title name, its font/color and visibility settings. System or custom Parameters can be used in the title.
  • Show Title – enable to show the title of the drill table.
    • Title – enter the title name.
  • Use Document Font – enable to force the placed view to adopt the font style defined in the global Draftsman Document Options dialog.
    • Font – use to open the Font dialog to select the desired font. This option is available only when Use Document Font is not checked.
  • Text Color – use the drop-down to select the color for text.
• Styles – sets the color and line weight/styles.
  • Table Line Style – use to open the Line Style dialog to select the line style for the table.
  • Even Row Color – use the drop-down to select the color for even rows.
  • Non-Even Row Color – use the drop-down to select the color odd rows.
  • Use Document Font – enable to use the document font.
  • Font – use to open the Font dialog to select the desired font. This option is available only when Use Document Font is not checked.
  • Text Color – use the drop-down to select the color for text.
  • Show Footer – enable to show the footer, which displays totals in the bottom table row.
• Columns – use the following options to manage the table data sort order, and column visibility and position order.
  • Visible – enable the checkboxes of the column captions you want to appear.
  • Order – click to toggle the sort order of the column: off, ascending, or descending.
  • Up – click to move the selected caption up one position in the list.
  • Down – click to move the selected caption down one position in the list.
• ​Units
  The units system (Millimeters/Mils/Inches) that applies to a Draftsman document is defined by the Measurement Unit setting in the Draftsman Document Options dialog (Tools » Document Options). However, for individual objects such as Linear/Radial Dimensions, Drill/BOM Tables and the Layer Stack Legend, their default units may be preset here. These settings will override the document's base Units setting when a new object of that type is placed. In turn, the Units used by the placed object can be locally changed through the Units option in the Draftsman Properties panel.
  • ​​Show Unit Names – enable to show unit names, for example, 10.1mm rather than just 10.1.​
  • Dual Units – check to enable two measurements for each dimension, with one set to show the Units type setting and the other showing the Dual Units type setting.
  • Primary Precision – use the drop-down to select the precision value from the list.
  • Dual Precision – use the drop-down to select the dual precision value from the list.
• ​Data Filtering
  • Pads / Vias – use the drop-down to select the desired items to filter: Pads, Vias, or All.
  • Plated / Non-Plated – use the drop-down to select the desired items to filter: Plated, Non-Plated, or All.

• Table