ToggleComponentDesignatorComment

Created: August 03, 2017 | Updated: July 20, 2018 | Applies to versions: 18.0, 18.1, 19.0, 19.1, 20.0, 20.1, 20.2 and 21

Now reading version 20.2. For the latest, read: ToggleComponentDesignatorComment for version 22

Parent page: PCB Commands

The following pre-packaged resources, derived from this base command, are available:

Toggle Component Designator Display (Context Sensitive)

Applied Parameters: Object=Designator|ContextObject=Component

Summary

This command is used to toggle the display of the designator - between not hidden and hidden - for the component under the cursor.

Access

This command is accessed from the PCB Editor by right-clicking over a placed component in the workspace then choosing the Component Actions » Hide Designator command (if the designator is currently shown), or the Component Actions » Show Designator command (if the designator is currently hidden) from the context menu.

Use

After launching the command, the component's designator will either be hidden or made visible depending on whether it is currently visible or not.

Tips

This command toggles the component's Show Designator property (when viewed through the PCB List panel). Display of the designator can also be controlled when viewing the properties for the selected component in the Properties panel. Click the control to the right of the Designator field, which will reflect the designator as being displayed () or hidden (), respectively.

Toggle Component Comment Display (Context Sensitive)

Applied Parameters: Object=Comment|ContextObject=Component

Summary

This command is used to toggle the display of the comment - between not hidden and hidden - for the component under the cursor.

Access

This command is accessed from the PCB Editor by right-clicking over a placed component in the workspace then choosing the Component Actions » Hide Comment command (if the comment is currently shown), or the Component Actions » Show Comment command (if the comment is currently hidden) from the context menu.

Use

After launching the command, the component's comment will either be hidden or made visible depending on whether it is currently visible or not.

Tips

This command toggles the component's Show Comment property (when viewed through the PCB List panel). Display of the comment can also be controlled when viewing the properties for the selected component in the Properties panel. Click the control to the right of the Comment field, which will reflect the comment as being displayed () or hidden (), respectively.

Printer-friendly version

If you find an issue, select the text/image and pressCtrl + Enterto send us your feedback.

ToggleComponentDesignatorComment

Summary

Access

Use

Tips

Summary

Access

Use

Tips

Was this page helpful?