WorkspaceManager_Dlg-EditCompVariationAltPartFormEdit Component Variation_AD

Nexus message

This documentation page references Altium NEXUS/NEXUS Client (part of the deployed NEXUS solution), which has been discontinued. All your PCB design, data management and collaboration needs can now be delivered by Altium Designer and a connected Altium 365 Workspace. Check out the FAQs page for more information.

 

The Edit Component Variation dialog with Fitted selected, Alternate Part selected with Use server Component unchecked, and Alternate Part selected with Use server Component checked.
The Edit Component Variation dialog with Fitted selected, Alternate Part selected with Use server Component unchecked, and Alternate Part selected with Use server Component checked.

Summary

The Edit Component Variation dialog provides controls to specify the variation of a component. Variants that use any of these types of variations are all referred to as Assembly Variants since they only impact the assembly process.

See Design Variants for more information about Variants.

Access

The dialog is accessed by clicking  in the Component Variation column (available after a variant is added) of the Components region in the Variant Management dialog, or by right-clicking on a component with a defined variant, while in compiled view mode, then choosing Part Actions  » Choose Alternate Part.

Option/Controls

  • Fitted - the original component as used in the base design is also fitted/used in this variant of that design. For a newly added variant, all components are fitted by default. The cell entry for a fitted component appears blank/empty.
  • Not Fitted - the original component as used in the base design is not fitted/used in this variant of that design. The entry for a component that is specified as being not fitted appears with the entry Not Fitted.
  • Alternate Part - this is the strongest form of variation. It allows you to substitute the original component as used in the base design with a completely different component in this variant of that design.​
If Alternate Part is selected, the dialog will expand to include controls to browse and locate the required component. This can be a server-based component (the Link to Vault Component region opens) or other component storage models supported in Altium NEXUS, such as independent libraries and database libraries (the Link to Library Component region opens).
  •  Use server Component - check this box to use a component from a server. Uncheck this box to use a library component. The coordinating Link to region will appear.
  • Link to Managed Component
    • Item Revision - click Choose to open the Choose Item dialog and select the desired item.
    • Source - click Show in Explorer to open a dialog in which you can search for and select the desired item.
    • Revision Details - this area shows the details of the selected component.
    • Revision State - this area shows the state of the vault component (e.g., Released).
  • Link to Library Component
    • Design Item ID - click Choose to open a dialog in which you can search for and select the desired library.
    • Library Name - check this box to display the name of the selected library.
    • Table Name - when Library Name is checked, check this box to display the table name.
    • Validate Link - click to validate the chosen link.
If you find an issue, select the text/image and pressCtrl + Enterto send us your feedback.
Content