Search In: Doc:Documentation: NEXUS Client
Altium DesignerAltium 365Altium MCAD CoDesignerAltium On-Prem Enterprise ServerAltium CircuitMakerAltium CircuitStudioCompany DashboardAltium Infrastructure Server
Ver: Version: 1.0
543.23.13.02.12.01.11.0
Close
Suche Search on Documentation
Documentation Altium NEXUS Documentation ... ((Dialog Reference))_AD Dialogs((S to Z))_AD

VaultExplorer_Dlg-DialogColumnSettingsSelect Columns (Explorer Panel) _AD

Created: November 21, 2017 | Updated: März 06, 2024 | Applies to version: 1.0

Nexus message

This documentation page references Altium NEXUS/NEXUS Client (part of the deployed NEXUS solution), which has been discontinued. All your PCB design, data management and collaboration needs can now be delivered by Altium Designer and a connected Altium 365 Workspace. Check out the FAQs page for more information.

The Select Columns dialog
The Select Columns dialog

Summary

The Select Columns dialog allows you to select which columns to display in the Explorer panel.

Access

From the Explorer panel, right-click on a column header in the upper-right grid region then choose Select Columns.

Options/Controls

  • Available Columns - lists the available columns that are currently not displayed.
  • Selected Columns - lists the currently displayed columns.
  • Add - click to add currently selected Available Columns (not displayed) to the Selected Columns (displayed) region.
  • Remove - click to add currently selected Selected Columns (displayed) to the Available Columns (not displayed) region.
  • All - click to move all the columns in the Selected Columns (displayed) region to the Available Columns (not displayed) region.
Selecting All will, in effect, delete all columns (and therefore all information) in the grid and cannot be undone. Use with caution!
If you find an issue, select the text/image and pressCtrl + Enterto send us your feedback.