UnifiedComponent_Cmd-DeleteDelete_AD

Created: April 10, 2019 | Updated: Januar 27, 2021 | Applies to versions: 2.0, 2.1, 3.0, 3.1, 3.2, 4 and 5

Now reading version 2.0. For the latest, read: UnifiedComponent_Cmd-Delete((Delete))_AD for version 5

Nexus message

This documentation page references Altium NEXUS/NEXUS Client (part of the deployed NEXUS solution), which has been discontinued. All your PCB design, data management and collaboration needs can now be delivered by Altium Designer and a connected Altium 365 Workspace. Check out the FAQs page for more information.

Parent page: UnifiedComponent Commands

The following pre-packaged resource, derived from this base command, is available:

Remove Component(s)

Applied Parameters: None

Summary

This command is used to remove one or more selected component definitions from the active Component Library document.

Access

This command can be accessed from the Component Library Editor when configured in Batch Editor mode by:

Selecting a single component definition (in the main grid region) and choosing the Edit » Remove <ComponentName> command from the main menus.
Right-clicking over a component definition (in the main grid region), and choosing the Remove <ComponentName> command from the context menu.
Selecting component definitions (in the main grid region) and choosing the Edit » Remove n Components command from the main menus.
Right-clicking over a component definition (in a group of n selected definitions in the main grid region), and choosing the Remove n Components command from the context menu.
Selecting the required component definition(s) and using the Ctrl+Delete keyboard shortcut.

If the Component Library Editor is currently in Single Component Editor mode, switch to the Batch Editor mode using the Tools » Switch to Batch Editor command.

Use

After launching the command, a dialog will appear asking you to confirm that you want to delete the selected component(s). Click Yes - the component definition(s) will be removed from the definitions region of the document.

Tip

The selected component definitions can also be removed by clicking the Remove Component control, which is located below the main grid region.

Druckversion

If you find an issue, select the text/image and pressCtrl + Enterto send us your feedback.

UnifiedComponent_Cmd-DeleteDelete_AD

Nexus message

Summary

Access

Use

Tip

Was this page helpful?