Search In: Doc:Documentation: NEXUS Client
Altium DesignerAltium 365Altium MCAD CoDesignerAltium On-Prem Enterprise ServerAltium CircuitMakerAltium CircuitStudioCompany DashboardAltium Infrastructure Server
Ver: Version: 1.0
543.23.13.02.12.01.11.0
Close
Suche Search on Documentation
Documentation Altium NEXUS Documentation ... ((Dialog Reference))_AD Dialogs((M to R))_AD

Sch_Dlg-ImplementationMapFormModel Map_AD

Created: Juli 12, 2017 | Updated: März 06, 2024 | Applies to versions: 1.0, 1.1, 2.0, 2.1, 3.0, 3.1 and 3.2
Now reading version 1.0. For the latest, read: Sch_Dlg-ImplementationMapForm((Model Map))_AD for version 5

Nexus message

This documentation page references Altium NEXUS/NEXUS Client (part of the deployed NEXUS solution), which has been discontinued. All your PCB design, data management and collaboration needs can now be delivered by Altium Designer and a connected Altium 365 Workspace. Check out the FAQs page for more information.

 The Model Map dialog
The Model Map dialog

Summary

The Model Map dialog allows you to map component pins with model pins.

Access

The dialog is accessed by clicking the Pin Map button in the PCB Model dialog. 

Options/Controls

  • Component Pin Designator - lists all component pins. This field is not editable.
  • Model Pin Designator - lists the model pin number. This field can be edited to match a component pin.
If you find an issue, select the text/image and pressCtrl + Enterto send us your feedback.