Search In: Doc:Documentation: NEXUS Client
Altium DesignerAltium 365Altium MCAD CoDesignerAltium On-Prem Enterprise ServerAltium CircuitMakerAltium CircuitStudioCompany DashboardAltium Infrastructure Server
Ver: Version: 1.1
543.23.13.02.12.01.11.0
Close
Suche Search on Documentation
Documentation Altium NEXUS Documentation ... ((Dialog Reference))_AD Dialogs((S to Z))_AD

PCB_Dlg-SelectionMemoryFormSelection Memory (PCB) _AD

Created: August 07, 2017 | Updated: März 06, 2024 | Applies to versions: 1.0 and 1.1

Nexus message

This documentation page references Altium NEXUS/NEXUS Client (part of the deployed NEXUS solution), which has been discontinued. All your PCB design, data management and collaboration needs can now be delivered by Altium Designer and a connected Altium 365 Workspace. Check out the FAQs page for more information.

The Selection Memory dialog
The Selection Memory dialog

Summary

The Selection Memory dialog allows you to store selected objects to memory and then recall these selections from memory.

Access

This dialog can be accessed from the PCB editor by pressing the Ctrl+Q shortcut keys.

Options/Controls

Note that the shortcut keys will not work if another dialog is currently open.
  • STO - click an STO # button to store the current selection in that memory slot.
  • Clear - click to clear the related memory slot.
  • Apply - click to highlight the related memory contents.
  • RCL - click to select the related memory contents.
  • Memory Slot Status - there are eight memory slots. This field will show the current status for these memory slots (e.g., Empty, 1 Component, 10 Tracks, etc.).
  • Lock - check this box to lock the selected objects into selection memory.
  • Mask - when enabled, all objects not falling under the scope of the filter will be masked.
  • Select - when enabled, the filtered objects will be selected in the workspace.
  • Zoom - when enabled, the filtered objects will be zoomed and centered (where possible) in the library editor window. The zoom action can be determined by the Zoom Library Components options set on the Schematic - Library AutoZoom page of the Preferences dialog.
  • Clear Existing - when enabled, previous selections will be cleared.
  • Clear - click to clear the selection status of any selected objects in document.
If you find an issue, select the text/image and pressCtrl + Enterto send us your feedback.