EDMSInterface_Dlg-SelectConfigurationItemFormSelect configuration item_AD

Nexus message

This documentation page references Altium NEXUS/NEXUS Client (part of the deployed NEXUS solution), which has been discontinued. All your PCB design, data management and collaboration needs can now be delivered by Altium Designer and a connected Altium 365 Workspace. Check out the FAQs page for more information.

Two variations of the Select configuration item dialog    Two variations of the Select configuration item dialog

Summary

The Select configuration item dialog is used to select a configuration item for a managed output job or when creating a new schematic and a released Schematic Template Item exists in the server to which you are actively signed in.

Access

The dialog is accessed in the following ways:

  • Click the Add button in the Managed OutputJobs tab of the Project Options (Project » Project Options) dialog.
  • Click File » New » Schematic from the main menus. 
The dialog is accessed in this way only if you are currently signed in to a server in which a released Schematic Template Item exists.

Options/Controls

  • Grid - the available configuration items are listed in terms of Name, Description, Item Revision, and Revision State. Select the desired configuration item from the list then click OK to add the selected item to the Managed OutputJobs tab of the Project Options dialog or to use the selected Schematic Template Item in the new schematic. 

Right-click Menu

  • Select Columns - click to open the Select Columns dialog to select which columns to display in the dialog.

 

If you find an issue, select the text/image and pressCtrl + Enterto send us your feedback.