Search In: Doc:Documentation: NEXUS Client
Altium DesignerAltium 365Altium MCAD CoDesignerAltium CircuitMakerCompany DashboardAltium On-Prem Enterprise ServerAltium Infrastructure Server
Ver: Version: 2.0
543.23.13.02.12.01.11.0
Close
Suche Search on Documentation
Documentation Altium NEXUS Documentation ... ((Dialog Reference))_AD Dialogs((S to Z))_AD

PCB_Dlg-Reconnect_OptionsFormSubnet Connector_AD

Created: Juni 07, 2017 | Updated: März 06, 2024 | Applies to versions: 1.0, 1.1, 2.0, 2.1, 3.0, 3.1, 3.2, 4 and 5
Now reading version 2.0. For the latest, read: PCB_Dlg-Reconnect_OptionsForm((Subnet Connector))_AD for version 5

This documentation page references Altium NEXUS/NEXUS Client (part of the deployed NEXUS solution), which has been discontinued. All your PCB design, data management and collaboration needs can now be delivered by Altium Designer and a connected Altium 365 Workspace. Check out the FAQs page for more information.

The Subnet Connector dialog
The Subnet Connector dialog

Summary

The Subnet Connector dialog provides controls to specify the maximum subnet separation.

Access

The dialog is accessed by clicking Route » Add Subnet Jumpers from the main menus.

Options/Controls

  • Maximum Subnet Separation - enter a value for the maximum subnet separation (100mil is the default value) of incomplete routing segments.
  • Run - click to automatically add subnet connectors to complete short routing segments (tracks that still have connection lines in between) on the current PCB document.
If you find an issue, select the text/image and pressCtrl + Enterto send us your feedback.