Search In: Doc:Documentation: NEXUS Client
Altium DesignerAltium 365Altium MCAD CoDesignerAltium CircuitMakerCompany DashboardAltium On-Prem Enterprise ServerAltium Infrastructure Server
Ver: Version: 1.0
543.23.13.02.12.01.11.0
Close
Suche Search on Documentation
Documentation Altium NEXUS Documentation ... ((Dialog Reference))_AD Dialogs((G to L))_AD

PCB_Dlg-JumpToPadNumberJump To Pad Number_AD

Created: Oktober 10, 2017 | Updated: März 06, 2024 | Applies to versions: 1.0, 1.1, 2.0, 2.1, 3.0, 3.1, 3.2, 4 and 5
Now reading version 1.0. For the latest, read: PCB_Dlg-JumpToPadNumber((Jump To Pad Number))_AD for version 5

This documentation page references Altium NEXUS/NEXUS Client (part of the deployed NEXUS solution), which has been discontinued. All your PCB design, data management and collaboration needs can now be delivered by Altium Designer and a connected Altium 365 Workspace. Check out the FAQs page for more information.

The Jump To Pad Number dialogThe Jump To Pad Number dialog

Summary

This dialog allows you to quickly jump to a specific pad within the design workspace by specifying the pad's number.

If the target pad is already displayed within the main design window, the cursor will simply jump to the center of that pad. If the pad is out of view, the cursor will be positioned at the center of the pad, centered within the main design window (where possible).

Access

The dialog can be accessed from the PCB Editor by using the Edit » Jump » Pad command from the main menus.

You can also use the J, P keyboard sequence directly from within the focused workspace.

Options/Controls

  • Pad Number - use this field to specify the number of the pad you wish to jump to. To jump to the pad of a specific component, enter the identifier for the pad in the format <ComponentDesignator>-<PinDesignator> (e.g., U3-12).

 

If you find an issue, select the text/image and pressCtrl + Enterto send us your feedback.