Search In: Doc:Documentation: NEXUS Client
Altium DesignerAltium 365Altium MCAD CoDesignerAltium CircuitMakerCompany DashboardAltium On-Prem Enterprise ServerAltium Infrastructure Server
Ver: Version: 1.0
543.23.13.02.12.01.11.0
Close
Suche Search on Documentation
Documentation Altium NEXUS Documentation ... ((Dialog Reference))_AD Dialogs((G to L))_AD

Dlg-ImportMCADBaselineImport MCAD Baseline_AD

Created: April 23, 2018 | Updated: März 06, 2024 | Applies to versions: 1.0 and 1.1
Now reading version 1.0. For the latest, read: Dlg-ImportMCADBaseline((Import MCAD Baseline))_AD for version 5

This documentation page references Altium NEXUS/NEXUS Client (part of the deployed NEXUS solution), which has been discontinued. All your PCB design, data management and collaboration needs can now be delivered by Altium Designer and a connected Altium 365 Workspace. Check out the FAQs page for more information.

The Import MCAD Baseline dialog
The Import MCAD Baseline dialog

Summary

The Import MCAD Baseline dialog is used to Import an IDX file (MCAD Baseline.idx). This file type is used for collaborating between ECAD and MCAD domains. Altium NEXUS facilitates this collaboration using the Mechanical CAD Collaboration extension, which is necessary to access this dialog.

Access

From the PCB Editor, click Import » MCAD IDX Baseline from the main menus.

The Mechanical CAD Collaboration extension (shown below) must be installed to access this dialog.

The extension can be found on the Purchased tab of the Extensions & Updates page (accessed by using the  drop-down at the top-right of the workspace then choosing Extensions and Updates).

Options/Controls

  • Input MCAD Baseline File - click  to browse for and select the desired IDX file to be imported.
  • Output PCB File - click  to browse for and select the desired PCB file into which proposed changes are to be synchronized.
Once the MCAD Baseline IDX file has been imported, collaboration proceeds through the Mechanical CAD Collaboration panel. For more information, see IDX Support.
If you find an issue, select the text/image and pressCtrl + Enterto send us your feedback.