Search In: Doc:Documentation: NEXUS Client
Altium DesignerAltium 365Altium MCAD CoDesignerAltium On-Prem Enterprise ServerAltium CircuitMakerAltium CircuitStudioCompany DashboardAltium Infrastructure Server
Ver: Version: 2.0
543.23.13.02.12.01.11.0
Close
Suche Search on Documentation
Documentation Altium NEXUS Documentation ... ((Dialog Reference))_AD Dialogs((A to F))_AD

PCB_Dlg-IncludeSnapPointFormChoose Selectable Points_AD

Created: Februar 05, 2019 | Updated: Februar 05, 2019 | Applies to versions: 2.0, 2.1, 3.0, 3.1, 3.2, 4 and 5

Nexus message

This documentation page references Altium NEXUS/NEXUS Client (part of the deployed NEXUS solution), which has been discontinued. All your PCB design, data management and collaboration needs can now be delivered by Altium Designer and a connected Altium 365 Workspace. Check out the FAQs page for more information.


The Choose Selectable Points dialog

Summary

The Choose Selectable Points dialog is used to select how a point is chosen on a 3D model when running various 3D Body placement commands.

Access

This dialog is opened after running a command that requires a point on a 3D model to be selected. Run the command, click on a placed 3D model then press the Tab key. Any of the following commands can be used to access the dialog:

  • Tools » 3D Body Placement » Orient And Position 3D Body.
  • Tools » 3D Body Placement » Position 3D Body.
  • Tools » 3D Body Placement » Set Body Height.
  • Tools » 3D Body Placement » Measure Distances.

Options/Controls

Up to two point types can be included:

  • Include Vertices - enable to be able to select and measure from any vertices on the 3D model.
  • Include Snap Points - enable to be able to select and measure from any placed snap points on the 3D model.
If you find an issue, select the text/image and pressCtrl + Enterto send us your feedback.