Parent page: PCB Commands
The following pre-packaged resource, derived from this base command, is available:
Layer Set
Applied Parameters: SetIndex=n (where n is in the range 0 to 20)
Summary
This command is used to switch to the indicated layer set.
Access
The related indexed commands are available from the PCB Editor from the Design » Manage Layer Sets sub-menu.
In addition, from both PCB and PCB Library Editors, the indexed commands are available from the context menu associated with the Layer Set control - accessed by clicking the LS part of the button to the left of the layer
tabs at the bottom of the main design window.
Use
After launching the command, the indicated layer set is made the current layer set with only its member layers presented visibly in the design space.
Tip