Search In: Doc:Documentation: Altium CircuitStudio
Altium DesignerAltium 365Altium MCAD CoDesignerAltium On-Prem Enterprise ServerAltium CircuitMakerCompany DashboardAltium Infrastructure Server
Close
搜索 Search on Documentation
Documentation CircuitStudio Documentation ... WorkspaceManager Dialogs

Choose Documents To Compare

Created: 十二月 16, 2024 | Updated: 八月 16, 2018
Other Related Resources
Differences between (Dialog)

Parent page: WorkspaceManager Dialogs

The Choose Documents To Compare dialog, shown in basic (left) and advanced (right) modes.

Summary

This dialog provides controls to choose which documents to compare when using the Comparator with any detected differences presented in the subsequent Differences between dialog. It is available in two modes - a basic mode that allows you to quickly select the target PCB document to compare against the project's source document hierarchy, and an advanced mode that gives control over the documents compared (document-to-document, project-to-project, or document-to-project).

Access

The dialog is accessed by right-clicking in the Projects panel then choosing the Show Differences command from the context menu.

For use in basic mode, ensure the project of interest is currently focused in the panel.

Options/Controls

  • Documents List - this region of the dialog lists the documents that can and selectively are to be compared. The appearance depends on the the mode as determined by the Advanced option:
    • Basic Mode - a single list will present the PCB documents for the focused design project. Choose the specific PCB document to compare against the design hierarchy of that project.
    • Advanced Mode - two lists are presented, each displaying the currently open projects and their documents. Choose a document on the left to compare against a document on the right. You can choose to compare a document with another document, a project with another project, or a document with a project (as per basic mode).
  • Advanced - use this option to toggle the dialog between its basic mode (disabled) and its advanced mode (enabled).
After choosing the documents and clicking OK, the Comparator will perform the comparison. The Comparator will adhere to the setup defined for it on the Comparator tab of the Project Options dialog and if any differences are detected whose associated comparison types are not set to be ignored, those differences will appear listed in the Differences between dialog.

 

If you find an issue, select the text/image and pressCtrl + Enterto send us your feedback.
Content