WorkspaceManager_Cmd-VaultCategory_CreateProjectVaultCategory_CreateProject_AD

Created: 六月 24, 2021 | Updated: 三月 06, 2024 | Applies to versions: 4 and 5

您正在阅读的是 4. 版本。关于最新版本，请前往 WorkspaceManager_Cmd-VaultCategory_CreateProject((VaultCategory_CreateProject))_AD 阅读 5 版本

This documentation page references Altium NEXUS/NEXUS Client (part of the deployed NEXUS solution), which has been discontinued. All your PCB design, data management and collaboration needs can now be delivered by Altium Designer and a connected Altium 365 Workspace. Check out the FAQs page for more information.

Parent page: WorkspaceManager Commands

The following pre-packaged resource, derived from this base command, is available:

Create Project

Applied Parameters: None

Summary

This command is used to create a project in an Altium NEXUS Workspace.

For more information about on-site servers and Workspaces, see Altium Concord Pro.

This command is only available if you are connected to an Altium NEXUS Workspace.

Access

When signed into an Altium NEXUS Workspace, right-click on the Workspace entry within the Projects panel then choose Create Project from the menu.

Use

Once the command is selected, the Create Project dialog opens in which you can configure and create the new project. After clicking Create, the new project will be created and appear in the Projects panel.

适合打印版本

If you find an issue, select the text/image and pressCtrl + Enterto send us your feedback.

WorkspaceManager_Cmd-VaultCategory_CreateProjectVaultCategory_CreateProject_AD

Summary

Access

Use

Was this page helpful?