WorkspaceManager_Cmd-VaultCategory_CreateComponentVaultCategory_CreateComponent_AD

Created: 六月 24, 2021 | Updated: 三月 06, 2024 | Applies to version: 4

您正在阅读的是 4. 版本。关于最新版本，请前往 WorkspaceManager_Cmd-VaultCategory_CreateComponent((VaultCategory_CreateComponent))_AD 阅读 5 版本

This documentation page references Altium NEXUS/NEXUS Client (part of the deployed NEXUS solution), which has been discontinued. All your PCB design, data management and collaboration needs can now be delivered by Altium Designer and a connected Altium 365 Workspace. Check out the FAQs page for more information.

Parent page: WorkspaceManager Commands

The following pre-packaged resource, derived from this base command, is available:

Create Component

Applied Parameters: None

Summary

This command is used to create a new component in an Altium NEXUS Workspace.

For more information about on-site servers and Workspaces, see Altium Concord Pro.

This command is only available if you are connected to an on-site server or Altium NEXUS Workspace.

Access

When signed into a Workspace, right-click on the entry in the Projects panel then choose Create Component from the menu.

Use

After the command is selected, the Create new component dialog opens in which you can select the component type. After clicking OK, the component editor opens in which you can configure the new component.

适合打印版本

If you find an issue, select the text/image and pressCtrl + Enterto send us your feedback.

WorkspaceManager_Cmd-VaultCategory_CreateComponentVaultCategory_CreateComponent_AD

Summary

Access

Use

Was this page helpful?