Sch_Cmd-LineOrBorderWidthSelectLineOrBorderWidthSelect_AD

Created: 八月 03, 2017 | Updated: 三月 06, 2024 | Applies to versions: 1.0, 1.1, 2.0, 2.1, 3.0, 3.1, 3.2, 4 and 5

您正在阅读的是 3.0. 版本。关于最新版本，请前往 Sch_Cmd-LineOrBorderWidthSelect((LineOrBorderWidthSelect))_AD 阅读 5 版本

This documentation page references Altium NEXUS/NEXUS Client (part of the deployed NEXUS solution), which has been discontinued. All your PCB design, data management and collaboration needs can now be delivered by Altium Designer and a connected Altium 365 Workspace. Check out the FAQs page for more information.

Parent page: Schematic Commands

The following pre-packaged resources, derived from this base command, are available:

Select Smallest Line/Border Width

Applied Parameters: _Value_=Smallest

Summary

This command is used to change the width of the line (or border) for the selected design object to Smallest, where applicable.

Access

This command is accessed from the Schematic Editor by clicking the button on the Line or Border Width drop-down () of the Formatting toolbar.

Use

First, ensure that the object whose line width or border width you wish to change is selected in the main design workspace.

After launching the command, the object's line or border width, as applicable, will be set to Smallest and change graphically in the workspace.

Tips

This feature will only be available if applicable to the currently selected object. That is, it has a Width or Border property.
You can select multiple objects to have their Width/Border changed using this feature.

Select Small Line/Border Width

Applied Parameters: _Value_=Small

Summary

This command is used to change the width of the line (or border) for the selected design object to Small, where applicable.

Access

This command is accessed from the Schematic Editor by clicking the button on the Line or Border Width drop-down () of the Formatting toolbar.

Use

First, ensure that the object whose line width or border width you wish to change is selected in the main design workspace.

After launching the command, the object's line or border width, as applicable, will be set to Small and change graphically in the workspace.

Tips

This feature will only be available if applicable to the currently selected object. That is, it has a Width or Border property.
You can select multiple objects to have their Width/Border changed using this feature.

Select Medium Line/Border Width

Applied Parameters: _Value_=Medium

Summary

This command is used to change the width of the line (or border) for the selected design object to Medium, where applicable.

Access

This command is accessed from the Schematic Editor by clicking the button on the Line or Border Width drop-down () of the Formatting toolbar.

Use

First, ensure that the object whose line width or border width you wish to change is selected in the main design workspace.

After launching the command, the object's line or border width, as applicable, will be set to Medium and change graphically in the workspace.

Tips

This feature will only be available if applicable to the currently selected object. That is, it has a Width or Border property.
You can select multiple objects to have their Width/Border changed using this feature.

Select Large Line/Border Width

Applied Parameters: _Value_=Large

Summary

This command is used to change the width of the line (or border) for the selected design object to Large, where applicable.

Access

This command is accessed from the Schematic Editor by clicking the button on the Line or Border Width drop-down () of the Formatting toolbar.

Use

First, ensure that the object whose line width or border width you wish to change is selected in the main design workspace.

After launching the command, the object's line or border width, as applicable, will be set to Large and change graphically in the workspace.

Tips

This feature will only be available if applicable to the currently selected object. That is, it has a Width or Border property.
You can select multiple objects to have their Width/Border changed using this feature.

适合打印版本

If you find an issue, select the text/image and pressCtrl + Enterto send us your feedback.

Sch_Cmd-LineOrBorderWidthSelectLineOrBorderWidthSelect_AD

Summary

Access

Use

Tips

Summary

Access

Use

Tips

Summary

Access

Use

Tips

Summary

Access

Use

Tips

Was this page helpful?