PDNAnalyzer_Cmd-RunPIDCRunPIDC_AD

Created: 十月 10, 2018 | Updated: 三月 06, 2024 | Applies to versions: 1.0 and 1.1

您正在阅读的是 1.1. 版本。关于最新版本，请前往 PDNAnalyzer_Cmd-RunPIDC((RunPIDC))_AD 阅读 5 版本

This documentation page references Altium NEXUS/NEXUS Client (part of the deployed NEXUS solution), which has been discontinued. All your PCB design, data management and collaboration needs can now be delivered by Altium Designer and a connected Altium 365 Workspace. Check out the FAQs page for more information.

Parent page: PDNAnalyzer Commands

The following pre-packaged resource, derived from this base command, is available:

Run PDN Analyzer

Applied Parameters: None

Summary

This command is used to run the PDN Analyzer with which you can analyze a board design's DC performance based on its electrical and physical properties.

To learn more about the PDN Analyzer, see PDN Analyzer.

Access

This command can be accessed from the Schematic Editor by:

Clicking Tools » PDN Analyzer from the main menus.

The command only becomes available provided the PDN Analyzer extension (available on the Purchased tab of the Extensions & Updates page) has been installed.

Use

After launching the command, the PDN Analyzer will open.

Tips

The PDN Analyzer extension must be installed before the PDN Analyzer can be accessed.

适合打印版本

If you find an issue, select the text/image and pressCtrl + Enterto send us your feedback.

PDNAnalyzer_Cmd-RunPIDCRunPIDC_AD

Summary

Access

Use

Tips

Was this page helpful?