PCB_Cmd-ComponentRuleCheckComponentRuleCheck_AD

Created: 七月 24, 2015 | Updated: 三月 06, 2024 | Applies to versions: 1.0, 1.1, 2.0, 2.1, 3.0, 3.1, 3.2 and 4

您正在阅读的是 3.0. 版本。关于最新版本，请前往 PCB_Cmd-ComponentRuleCheck((ComponentRuleCheck))_AD 阅读 5 版本

This documentation page references Altium NEXUS/NEXUS Client (part of the deployed NEXUS solution), which has been discontinued. All your PCB design, data management and collaboration needs can now be delivered by Altium Designer and a connected Altium 365 Workspace. Check out the FAQs page for more information.

Parent page: PCB Commands

The following pre-packaged resource, derived from this base command, is available:

Component Rule Check

Applied Parameters: None

Summary

This command is used to search the current PCB Library document for user-specified errors, such as duplicate footprints or missing pad names.

Access

This command is accessed from the PCB Library Editor by choosing the Reports » Component Rule Check command from the main menus.

Use

After launching the command, the Component Rule Check dialog opens. Use this dialog to set the attributes for which you want to test. After clicking OK, a report titled <LibraryName>.ERR is generated and opened as the active document. Each component footprint that is found to be in error is listed, along with the specific tests that it failed.

Tips

The report will be added to the Projects panel as a free document under the Documentation\Text Documents sub-folder.

适合打印版本

If you find an issue, select the text/image and pressCtrl + Enterto send us your feedback.

PCB_Cmd-ComponentRuleCheckComponentRuleCheck_AD

Summary

Access

Use

Tips

Was this page helpful?