MaterialLibrary_Dlg-SelectMaterialSelect Material_AD
Created: 十二月 08, 2020 | Updated: 十二月 08, 2020
| Applies to version: 4
您正在阅读的是 4. 版本。关于最新版本,请前往 MaterialLibrary_Dlg-SelectMaterial((Select Material))_AD 阅读 5 版本
Summary
The Select Material dialog allows you to select a specific material for the currently selected layer in the layer stack. The dialog restricts the Altium Material Library dialog to show only materials suitable for the layer selected.
Access
The dialog is accessed in the following ways:
- From a Layer Stack document (*.PcbDoc [Stackup]), click
in a cell of the Material column.
- From the Stackup tab of a Layer Stack document (*.PcbDoc [Stackup]), click
in the Material field in the Properties panel in Layer Stack Manager mode.
Options/Controls
- Units Selector - click the desired units for the Thickness: mil, in, µm, or mm.
-
- click to open the Material Library Settings dialog in which you can select the columns displayed in the Select Material dialog.
- Grid - the grid displays information about the materials suitable for the layer that was used to access the Select Material dialog. Select the desired item then click OK to use that material in the Layer Stack.