Search In: Doc:Documentation: NEXUS Client
Altium DesignerAltium 365Altium MCAD CoDesignerAltium CircuitMakerCompany DashboardAltium On-Prem Enterprise ServerAltium Infrastructure Server
Ver: Version: 4
543.23.13.02.12.01.11.0
Close
搜索 Search on Documentation
Documentation Altium NEXUS 文档 ... 对话框参考 Dialogs((S to Z))_AD

EDMSInterface_Dlg-EditVisibleColumnsFormSelect Columns_AD

Created: 九月 19, 2019 | Updated: 九月 19, 2019 | Applies to versions: 3.0, 3.1, 3.2, 4 and 5
您正在阅读的是 4. 版本。关于最新版本，请前往 EDMSInterface_Dlg-EditVisibleColumnsForm((Select Columns))_AD 阅读 5 版本

This documentation page references Altium NEXUS/NEXUS Client (part of the deployed NEXUS solution), which has been discontinued. All your PCB design, data management and collaboration needs can now be delivered by Altium Designer and a connected Altium 365 Workspace. Check out the FAQs page for more information.

The Select Columns dialogThe Select Columns dialog

Summary

The Select Columns dialog is used to select which columns to display in the Select configuration item dialog when selecting a configuration item for a managed output job or when creating a new schematic and a released Schematic Template Item exists in the server to which you are actively signed in.

Access

The dialog is accessed by right-clicking in the Select configuration item dialog then selecting Select Columns.

Options/Controls

  • Known Columns - lists the available columns that are currently not displayed.
  • Selected Columns - lists the currently displayed columns.
  • Add - click to add the currently selected Known Columns (not displayed) to the Selected Columns (displayed) region.
  • Remove - click to add the currently selected Selected Columns (displayed) to the Known Columns (not displayed) region.
  • All - click to move all the columns in the Selected Columns (displayed) region to the Known Columns (not displayed) region.
If the Selected Columns section is empty (after selecting All, or by moving the columns manually), all columns will show within the Select configuration item dialog by default. Due to this, there will always be at least one column within the dialog.
If you find an issue, select the text/image and pressCtrl + Enterto send us your feedback.