Altium Designer 文档
...
对话框参考
Dialogs((S to Z))_AD
WorkspaceManager_Dlg-PCBSelectLayer_FormSelect Layer_AD
Created: 十一月 18, 2020 | Updated: 二月 17, 2021
| Applies to version: 21
您正在阅读的是 22.0. 版本。关于最新版本，请前往 WorkspaceManager_Dlg-PCBSelectLayer_Form((Select Layer))_AD 阅读 21 版本
Summary
This dialog provides controls to select which mechanical layers are added to all plot layers in the selected layer group from the ODB++ Setup dialog.
Access
The Select Layer dialog is accessed from the ODB++Setup dialog in the following ways:
- Right-click on a layer group entry in the Layers to Plot section then select Edit Group.
- Click
from the layer group entry. - Select a layer group entry then select Edit Group from the Plot Layers drop-down menu.
Options/Controls
- Layer Name - lists the mechanical layers.
- Selected - check the box next to each mechanical layer(s) you want added to all plots.