WorkspaceManager_Dlg-UseComponentDataUse Component Data_AD

Summary

The Use Component Data dialog provides controls to define components using data from the cloud. The parameters displayed allow you to copy data from a cloud component into the component you are currently editing.

Access

The dialog is accessed in the following ways:

• Choose a component from the Manufacturer Part Search panel then select Acquire from the right-click context menu to open the Create new component dialog. Select a component type then click OK.
• Click Tools » Create from Part Search from the main menus of the Single Component Editor then select a category. Select a part in the resulting list then click OK.

Options/Controls

• Only matching - enable this option to only display data matching the current component. Disabling this option will display all the data available in the cloud component.

• Parameters/Symbols/Footprints/Datasheets, etc. (nn) - check/uncheck the box to enable/disable all items in that category.

  For parameters, checked parameters display the value that will be used from the cloud. Unchecked parameters display the current value.
• Update - checked items will display Update for that parameter; unchecked items will have a blank display denoting no update will occur.
• Replace - if the checkbox is checked, the data for this item will be replaced.
• Add - if the checkbox is checked, the data for this item will be added from the cloud.