Search In: Doc:Documentation: Altium Designer
Altium DesignerAltium 365Altium MCAD CoDesignerAltium On-Prem Enterprise ServerCompany Dashboard
Ver: Version: 22
222120.220.120.019.119.018.118.017.117.016.116.015.1
Close
搜索 Search on Documentation
Documentation Altium Designer 文档 ... 对话框参考 Dialogs((A to F))_AD

WorkspaceManager_Dlg-DiffReportSetup_FormDifferences Setup_AD

Created: 六月 09, 2022 | Updated: 六月 09, 2022 | Applies to version: 22

This document is no longer available beyond version 22. Information can now be found here: Preparing a Differences Report for version 25

注

软件的功能取决于您购买的Altium产品级别。您可以比较Altium Designer软件订阅的各个级别中包含的功能，以及通过Altium 365平台提供的应用程序所能实现的功能。

如果您在软件中找不到某个讨论过的功能，请联系Altium销售团队以获取更多信息。

The Differences Setup dialog
The Differences Setup dialog

Summary Copy Link Copied

The Differences Setup dialog allows you to configure the settings for findings in a Differences Report.

Using validation reports defined in an assigned Output Job file provides the ability to validate your designs as an integral part of its board design release process. These validation checks will be performed on every release and the release will fail if any validation checks are not passed successfully. This gives you additional peace of mind that costly errors do not creep in to your released designs due to last minute changes. Validation is run at the Validate Design stage of the process flow within the PCB Release view. In Design Mode, the validation checks are performed directly on your project, before outputs are generated. In Release Mode, the release flow first builds a self-contained snapshot from your project that includes all project documents and external dependencies, and the validation checks are performed on this snapshot. This provides additional security that the snapshot has correctly captured all the required dependencies for your project.

Access Copy Link Copied

The dialog is accessed in one of the following ways:

  • In the Project Options - Default Prints dialog, select Differences Report in the Validation Outputs section, then click Configure.
  • In an OutJob, right-click [Add New Validation Output] under Validation Ouputs then choose Differences Report from the sub-menu then select the desired document. 
  • In an OutJob, double-click a Differences Report entry under Validation Ouputs.

Options/Controls Copy Link Copied

  • Comparison Type Description/Mode - this is a list of all differences that are available to be checked and reported. Click the entry in the Mode column to choose from the following comparison types:
    • Ignore Differences
    • Find Differences
  • Set To Project Default - click to revert to the default settings.
中文(简体)
If you find an issue, select the text/image and pressCtrl + Enterto send us your feedback.
适合打印版本
注

软件的功能取决于您购买的Altium产品级别。您可以比较Altium Designer软件订阅的各个级别中包含的功能，以及通过Altium 365平台提供的应用程序所能实现的功能。

如果您在软件中找不到某个讨论过的功能，请联系Altium销售团队以获取更多信息。