Altium Designer 文档
...
对话框参考
Dialogs((A to F))_AD
WorkspaceManager_Dlg-AddCatalogItemToBOMFormAdd to BOM Components_AD
Created: 二月 14, 2016 | Updated: 六月 16, 2017
| Applies to versions: 15.1, 16.0, 16.1 and 17.0
您正在阅读的是 16.1. 版本。关于最新版本，请前往 WorkspaceManager_Dlg-AddCatalogItemToBOMForm((Add to BOM Components))_AD 阅读 17.1 版本
The full and abbreviated versions of the Add to BOM Components dialog
Summary
The Add to BOM Components dialog is used to add BOM catalog items to the BOM components.
Access
The dialog is accessed from a *.BomDoc in the following ways:
- On the BOM Components tab:
- Click Add from Catalog located in the menu items under the tab name.
- Right-click in the main grid area then select Add from Catalog.
- On the BOM Catalog tab:
- Click Add to BOM located in the menu items under the tab name.
- Right-click in the main grid area then select Add instances of [Design Item Id] to BOM.
Options/Controls
- Choose BOM Catalog Item from List - this region lists BOM catalog items that are available to add to the BOM components. Information listed includes:
- Item Type
- Design Item Id
- Catalog Item Source
- Description
- Designator Prefix - use to specify the designator prefix of the item. Enter the designator prefix or hover the cursor over the right-hand side of the text box to access a drop down from which you can select the designator prefix.
- Separator - use to specify the separator. Enter the separator or hover the cursor over the right-hand side of the text box to access a drop down from which you can select the separator.
- Quantity - use to specify the quantity of the item. Enter the quantity or hover the cursor over the right-hand side of the text box to access up and down arrows to select the quantity.